NSN 5315-01-515-1278
Part Details | HEADED STRAIGHT PIN
5315-01-515-1278 A headed, cylindrically-shaped item having a solid shank for fitting into corresponding holes, used for aligning or fastening. It may have welding projections. It also may contain holes drilled perpendicular to axial centerline. Excludes PIN, ECCENTRIC.
Alternate Parts: 5002601007, 5002601-007, 1HA2, 1HA2, 5315-01-515-1278, 01-515-1278, 5315015151278, 015151278
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 53 | NOV 17, 2003 | 01-515-1278 | 02384 ( PIN, STRAIGHT, HEADED ) |
REFERENCE DRAWINGS & PICTURES
BUTTON (RATIO OF HGTH/CRRG OVER 0.190 TO 0.300 INCLUSIVE)
STRAIGHT
Cross Reference | NSN 5315-01-515-1278
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| 5002601-007 | 0SZB6 | MANITEX INC |
| 1HA2 | 45152 | OSHKOSH CORPORATION |
| 1HA2 | 75Q65 | OSHKOSH DEFENSE, LLC |
Technical Data | NSN 5315-01-515-1278
| Characteristic | Specifications |
|---|---|
| STYLE DESIGNATOR | STRAIGHT |
| CHAMFER LENGTH | 16.060 INCHES MINIMUM |
| DIAMETER | 2.748 INCHES MINIMUM |
| UNDER HEAD LENGTH | 1.370 INCHES NOMINAL |
| PIN CHAMFER ANGLE | 4.5 RADIANS NOMINAL |
| HEAD STYLE | 1 BUTTON (RATIO OF HGTH/CRRG OVER 0.190 TO 0.300 INCLUSIVE) |
| WIDTH ACROSS FLATS | 4.500 INCHES NOMINAL |
| PIN HEAD DIAMETER | 3.760 INCHES NOMINAL |
| HEIGHT | 0.500 INCHES NOMINAL |
| SPECIAL FEATURES | PIN MAY BE CENTER DRILLED FOR PLATING. PLATING PIN BODY HARD CHROMED ANDPOLISHED THICKNESS 0.001-0.002 INCH SURFACE HARDNESS ROCKWELL C 50 MIN. PLATING END PLATE AND PIN EDGE XYLAN COATED 5251/621 SILVER DRY FILM THICKNESS 0.70 TO 0.90 MIL |
| END ITEM IDENTIFICATION | 2320014652260 |