NSN 5315-01-515-5311
Part Details | HEADLESS SHOULDER PIN
5315-01-515-5311 A cylindrically-shaped headless item, having a shank at one or both ends. It is used for aligning, fastening, or transfer of torque and/or thrust by fitting into corresponding holes of another item. It may be threaded on one end.
Alternate Parts: MBEU148656, MBEU148656, 5315-01-515-5311, 01-515-5311, 5315015155311, 015155311
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 53 | NOV 27, 2003 | 01-515-5311 | 16749 ( PIN, SHOULDER, HEADLESS ) |
REFERENCE DRAWINGS & PICTURES
CHAMFERED
CHAMFERED
SHOULDER
Cross Reference | NSN 5315-01-515-5311
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| MBEU148656 | U1604 | MARTIN BAKER AIRCRAFT CO LTDDBA MARTIN-BAKER |
| MBEU148656 | 30003 | NAVAL AIR SYSTEMS COMMAND MANAGEDORIGINAL DESIGN ACTIVITY NOT |
Technical Data | NSN 5315-01-515-5311
| Characteristic | Specifications |
|---|---|
| STYLE DESIGNATOR | SHOULDER |
| SHANK LENGTH | 0.250 INCHES NOMINAL |
| SHOULDER DIAMETER | 0.309 INCHES MINIMUM AND 0.311 INCHES MAXIMUM |
| SHANK DIAMETER | 0.250 INCHES NOMINAL |
| OVERALL LENGTH | 1.000 INCHES NOMINAL |
| FIRST END STYLE | CHAMFERED |
| FIRST END TAPER LENGTH | 0.020 INCHES NOMINAL |
| FIRST END TAPER ANGLE | 45.0 DEGREES NOMINAL |
| SECOND END RELATIONSHIP WITH FIRST END | NOT IDENTICAL |
| SECOND END STYLE | CHAMFERED |
| SECOND END TAPER LENGTH | 0.030 INCHES NOMINAL |
| SECOND END TAPER ANGLE | 45.0 DEGREES NOMINAL |
| FIRST END LOCATION | THREADED END |
| THREAD SERIES DESIGNATOR | UNF |
| NOMINAL THREAD SIZE | 0.250 INCHES |
| THREAD QUANTITY PER INCH | 28 |
| THREAD CLASS | 2A |
| THREAD DIRECTION | RIGHT-HAND |
| THREAD LENGTH | 0.250 INCHES NOMINAL |
| SPECIAL FEATURES | ITEM HAS HEX WASHER ATTACHED |
| END ITEM IDENTIFICATION | BUCKET AND MECH ASSY |
| PART NAME ASSIGNED BY CONTROLLING AGENCY | INAVY-PIN PIVOT L/H |