NSN 5315-01-536-1337
Part Details | HEADLESS SHOULDER PIN
5315-01-536-1337 A cylindrically-shaped headless item, having a shank at one or both ends. It is used for aligning, fastening, or transfer of torque and/or thrust by fitting into corresponding holes of another item. It may be threaded on one end.
Alternate Parts: 55003, 5315-01-536-1337, 01-536-1337, 5315015361337, 015361337
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 53 | DEC 20, 2005 | 01-536-1337 | 16749 ( PIN, SHOULDER, HEADLESS ) |
REFERENCE DRAWINGS & PICTURES
CHAMFERED
CHAMFERED
UNDERCUT
Cross Reference | NSN 5315-01-536-1337
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| 55003 | 99643 | EATON CORPORATIONDBA EATON AEROSPACE |
Technical Data | NSN 5315-01-536-1337
| Characteristic | Specifications |
|---|---|
| STYLE DESIGNATOR | UNDERCUT |
| SHANK LENGTH | 0.140 INCHES NOMINAL |
| SHOULDER DIAMETER | 0.395 INCHES MINIMUM AND 0.405 INCHES MAXIMUM |
| SHANK DIAMETER | 0.134 INCHES MINIMUM AND 0.144 INCHES MAXIMUM |
| OVERALL LENGTH | 1.030 INCHES NOMINAL |
| UNDERCUT DIAMETER | 0.134 INCHES MINIMUM AND 0.144 INCHES MAXIMUM |
| UNDERCUT WIDTH | 0.070 INCHES NOMINAL |
| SECOND SHANK DIAMETER | 0.188 INCHES MINIMUM AND 0.190 INCHES MAXIMUM |
| SECOND SHANK LENGTH | 0.330 INCHES NOMINAL |
| FIRST END STYLE | CHAMFERED |
| FIRST END TAPER LENGTH | 0.020 INCHES NOMINAL |
| FIRST END TAPER ANGLE | 45.0 DEGREES NOMINAL |
| SECOND END RELATIONSHIP WITH FIRST END | IDENTICAL |
| FIRST END LOCATION | THREADED END |
| THREAD SERIES DESIGNATOR | UNJF |
| NOMINAL THREAD SIZE | 0.190 INCHES |
| THREAD CLASS | 3A |
| THREAD DIRECTION | RIGHT-HAND |
| THREAD LENGTH | 0.140 INCHES NOMINAL |
| SPECIAL FEATURES | SHOULDER IS OVAL 0.275 IN MIN AND0.285 IN MAX WIDTH AND IS OFFSET 0.135IN MIN AND 0.145 IN MAX FROM ONE SIDE |
| END ITEM IDENTIFICATION | C-17A |
| PART NAME ASSIGNED BY CONTROLLING AGENCY | PIN, DETENT |