NSN 5340-00-616-5958
Part Details | DOUBLE ANGLE BRACKET
5340-00-616-5958 A rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.
Alternate Parts: 6812254, 6812254, 6812254, 5340-00-616-5958, 00-616-5958, 5340006165958, 006165958
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 53 | JAN 01, 1963 | 00-616-5958 | 20354 ( BRACKET, DOUBLE ANGLE ) |
REFERENCE DRAWINGS & PICTURES
END RADIUS
ONE HOLE
END RADIUS
ONE HOLE
DOUBLE ANGLE
Cross Reference | NSN 5340-00-616-5958
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| 6812254 | 73342 | ALLISON TRANSMISSION, INC. |
| 6812254 | 24617 | GENERAL MOTORS CORP |
| 6812254 | 63005 | ROLLS-ROYCE CORPORATION |
Technical Data | NSN 5340-00-616-5958
| Characteristic | Specifications |
|---|---|
| MATERIAL | STEEL |
| FABRICATION METHOD | STAMPED |
| SURFACE TREATMENT | CADMIUM |
| STYLE DESIGNATOR | DOUBLE ANGLE |
| FIRST LEG LENGTH | 0.688 INCHES NOMINAL |
| SECOND LEG LENGTH | 1.938 INCHES NOMINAL |
| FIRST LEG THICKNESS | 0.055 INCHES MINIMUM AND 0.065 INCHES MAXIMUM |
| SECOND LEG THICKNESS | 0.055 INCHES MINIMUM AND 0.065 INCHES MAXIMUM |
| CENTER SECTION HEIGHT | 0.500 INCHES NOMINAL |
| CENTER SECTION WIDTH | 0.500 INCHES NOMINAL |
| CENTER SECTION THICKNESS | 0.055 INCHES MINIMUM AND 0.065 INCHES MAXIMUM |
| FIRST LEG ANGLE | 90.0 DEGREES NOMINAL |
| SECOND LEG ANGLE | 90.0 DEGREES NOMINAL |
| FIRST LEG STYLE | END RADIUS |
| FIRST LEG WIDTH | 0.500 INCHES NOMINAL |
| FIRST LEG END RADIUS | 0.500 INCHES NOMINAL |
| SECOND LEG WIDTH | 0.500 INCHES NOMINAL |
| SECOND LEG END RADIUS | 0.500 INCHES NOMINAL |
| FIRST LEG HOLE ARRANGEMENT STYLE | ONE HOLE |
| FIRST LEG HOLE DIAMETER | 0.279 INCHES MINIMUM AND 0.288 INCHES MAXIMUM |
| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.250 INCHES NOMINAL |
| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.250 INCHES NOMINAL |
| SECOND LEG HOLE DIAMETER | 0.217 INCHES MINIMUM AND 0.255 INCHES MAXIMUM |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.250 INCHES NOMINAL |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.250 INCHES NOMINAL |
| SECOND LEG RELATIONSHIP TO FIRST LEG | NOT IDENTICAL |
| SECOND LEG STYLE | END RADIUS |
| SECOND LEG HOLE ARRANGEMENT STYLE | ONE HOLE |