NSN 5340-01-228-1709
Part Details | DOUBLE ANGLE BRACKET
5340-01-228-1709 A rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.
Alternate Parts: 10938258, 5340-01-228-1709, 01-228-1709, 5340012281709, 012281709
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 53 | MAR 15, 1986 | 01-228-1709 | 20354 ( BRACKET, DOUBLE ANGLE ) |
REFERENCE DRAWINGS & PICTURES
SQUARE
TWO HOLES
SQUARE
TWO HOLES
OFFSET DOUBLE ANGLE
Cross Reference | NSN 5340-01-228-1709
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| 10938258 | 19207 | U S ARMY TANK AUTOMOTIVE COMMANDAMSTA-IM-MM |
Technical Data | NSN 5340-01-228-1709
| Characteristic | Specifications |
|---|---|
| MATERIAL | STEEL COMP 1010 |
| MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-631 MIL SPEC SINGLE MATERIAL RESPONSE |
| SURFACE TREATMENT | PRIMER AND ENAMEL |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | TT-P-636 MIL SPEC 1ST TREATMENT RESPONSE AND TT-E-529 MIL SPEC 2ND TREATMENT RESPONSE |
| STYLE DESIGNATOR | OFFSET DOUBLE ANGLE |
| FIRST LEG LENGTH | 1.123 INCHES NOMINAL |
| SECOND LEG LENGTH | 1.938 INCHES NOMINAL |
| FIRST LEG THICKNESS | 0.188 INCHES NOMINAL |
| SECOND LEG THICKNESS | 0.188 INCHES NOMINAL |
| CENTER SECTION HEIGHT | 5.380 INCHES NOMINAL |
| CENTER SECTION WIDTH | 3.250 INCHES NOMINAL |
| CENTER SECTION THICKNESS | 0.188 INCHES NOMINAL |
| SECOND LEG ANGLE | 73.0 DEGREES NOMINAL |
| FIRST LEG OFFSET ANGLE | 90.0 DEGREES NOMINAL |
| SECOND LEG OFFSET ANGLE | 73.0 DEGREES NOMINAL |
| FIRST LEG STYLE | SQUARE |
| FIRST LEG WIDTH | 3.250 INCHES NOMINAL |
| SECOND LEG WIDTH | 3.250 INCHES NOMINAL |
| FIRST LEG HOLE ARRANGEMENT STYLE | TWO HOLES |
| FIRST LEG HOLE DIAMETER | 0.470 INCHES NOMINAL |
| FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH | 2.000 INCHES NOMINAL |
| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.625 INCHES NOMINAL |
| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.500 INCHES NOMINAL |
| SECOND LEG HOLE DIAMETER | 0.340 INCHES NOMINAL |
| SECOND LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH | 2.380 INCHES NOMINAL |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.435 INCHES NOMINAL |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.500 INCHES NOMINAL |
| SECOND LEG RELATIONSHIP TO FIRST LEG | NOT IDENTICAL |
| SECOND LEG STYLE | SQUARE |
| SECOND LEG HOLE ARRANGEMENT STYLE | TWO HOLES |
| END ITEM IDENTIFICATION | TRUCK DUMP M51A2 |