NSN 5340-01-237-4215
Part Details | DOUBLE ANGLE BRACKET
5340-01-237-4215 A rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.
Alternate Parts: 9M672C1L, 9M672C1L, 10113003, 9M672C1L, 5340-01-237-4215, 01-237-4215, 5340012374215, 012374215
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 53 | JUL 31, 1986 | 01-237-4215 | 20354 ( BRACKET, DOUBLE ANGLE ) |
REFERENCE DRAWINGS & PICTURES
CORNER RADIUS
TWO HOLES
CORNER RADIUS
TWO HOLES
DOUBLE ANGLE
Cross Reference | NSN 5340-01-237-4215
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| 9M672C1L | 76301 | BOEING COMPANY, THEDBA BOEING |
| 9M672C1L | 04967 | FASTENER SPECIALTY, INC. |
| 10113003 | A486G | NIMIKKEISTOKESKUS NCB FINLAND |
| 9M672C1L | 59570 | TRICO MANUFACTURING INC. |
Technical Data | NSN 5340-01-237-4215
| Characteristic | Specifications |
|---|---|
| MATERIAL | ALUMINUM ALLOY 2024 |
| MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-250 TO 5 T81 FED SPEC SINGLE MATERIAL RESPONSE |
| SURFACE TREATMENT | PRIMER AND CHROMATE |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-P-23377 MIL SPEC 1ST TREATMENT RESPONSE AND MIL-C-5541 MIL SPEC 2ND TREATMENT RESPONSE |
| STYLE DESIGNATOR | DOUBLE ANGLE |
| FIRST LEG THICKNESS | 0.050 INCHES NOMINAL |
| SECOND LEG THICKNESS | 0.050 INCHES NOMINAL |
| CENTER SECTION HEIGHT | 0.500 INCHES NOMINAL |
| CENTER SECTION WIDTH | 1.000 INCHES NOMINAL |
| CENTER SECTION THICKNESS | 0.050 INCHES NOMINAL |
| FIRST LEG ANGLE | 90.0 DEGREES NOMINAL |
| SECOND LEG ANGLE | 90.0 DEGREES NOMINAL |
| FIRST LEG STYLE | CORNER RADIUS |
| FIRST LEG WIDTH | 1.000 INCHES NOMINAL |
| FIRST LEG CORNER RADIUS | 0.250 INCHES NOMINAL |
| SECOND LEG WIDTH | 1.000 INCHES NOMINAL |
| SECOND LEG CORNER RADIUS | 0.250 INCHES NOMINAL |
| FIRST LEG HOLE ARRANGEMENT STYLE | TWO HOLES |
| FIRST LEG HOLE DIAMETER | 0.129 INCHES MINIMUM AND 0.134 INCHES MAXIMUM |
| FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH | 0.500 INCHES NOMINAL |
| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.250 INCHES NOMINAL |
| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.500 INCHES NOMINAL |
| SECOND LEG HOLE DIAMETER | 0.220 INCHES MINIMUM AND 0.230 INCHES MAXIMUM |
| SECOND LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH | 0.050 INCHES NOMINAL |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.250 INCHES NOMINAL |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.500 INCHES NOMINAL |
| SECOND LEG RELATIONSHIP TO FIRST LEG | NOT IDENTICAL |
| SECOND LEG STYLE | CORNER RADIUS |
| SECOND LEG HOLE ARRANGEMENT STYLE | TWO HOLES |
| MOUNTING HOLE TYPE | PLAIN |
| SPECIAL FEATURES | ITEM ATTACHED WITH RIVETS; REQUIRES CLIP NUT,LH POSITION |
| END ITEM IDENTIFICATION | F-15 |