NSN 5340-01-255-5037
Part Details | DOUBLE ANGLE BRACKET
5340-01-255-5037 A rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.
Alternate Parts: 607102701, 60710270-1, 5340-01-255-5037, 01-255-5037, 5340012555037, 012555037
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 53 | MAY 21, 1987 | 01-255-5037 | 20354 ( BRACKET, DOUBLE ANGLE ) |
REFERENCE DRAWINGS & PICTURES
SQUARE
ONE HOLE
SQUARE
ONE HOLE
DOUBLE ANGLE
Cross Reference | NSN 5340-01-255-5037
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| 60710270-1 | 34860 | NORTHROP GRUMMAN SYSTEMS CORPORATION |
Technical Data | NSN 5340-01-255-5037
| Characteristic | Specifications |
|---|---|
| MATERIAL | STEEL COMP 303 |
| MATERIAL DOCUMENT AND CLASSIFICATION | ASTM A582 ASSN STD SINGLE MATERIAL RESPONSE |
| SURFACE TREATMENT | PASSIVATE |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-35,TY 4 FED SPEC SINGLE TREATMENT RESPONSE |
| STYLE DESIGNATOR | DOUBLE ANGLE |
| FIRST LEG LENGTH | 0.350 INCHES NOMINAL |
| SECOND LEG LENGTH | 0.430 INCHES NOMINAL |
| FIRST LEG THICKNESS | 0.050 INCHES NOMINAL |
| SECOND LEG THICKNESS | 0.050 INCHES NOMINAL |
| CENTER SECTION HEIGHT | 0.250 INCHES NOMINAL |
| CENTER SECTION WIDTH | 0.240 INCHES NOMINAL |
| CENTER SECTION THICKNESS | 0.050 INCHES NOMINAL |
| FIRST LEG ANGLE | 90.0 DEGREES NOMINAL |
| SECOND LEG ANGLE | 90.0 DEGREES NOMINAL |
| FIRST LEG STYLE | SQUARE |
| FIRST LEG WIDTH | 0.240 INCHES NOMINAL |
| SECOND LEG WIDTH | 0.520 INCHES NOMINAL |
| FIRST LEG HOLE ARRANGEMENT STYLE | ONE HOLE |
| FIRST LEG HOLE DIAMETER | 0.092 INCHES MINIMUM AND 0.097 INCHES MAXIMUM |
| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.080 INCHES NOMINAL |
| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.150 INCHES NOMINAL |
| SECOND LEG HOLE DIAMETER | 0.115 INCHES MINIMUM AND 0.120 INCHES MAXIMUM |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.220 INCHES NOMINAL |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.096 INCHES NOMINAL |
| SECOND LEG RELATIONSHIP TO FIRST LEG | NOT IDENTICAL |
| MOUNTING HOLE TYPE | PLAIN |
| SPECIAL FEATURES | SECOND LEG HAS ADDITIONAL HOLE 0.040 IN. DIA |