NSN 5340-01-262-4160
Part Details | DOUBLE ANGLE BRACKET
5340-01-262-4160 A rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.
Alternate Parts: 0150344001, 015-0344-001, 0150343001, 015-0343-001, 2271035002, 227-1035-002, 1134663G2, 1134663G1, 5340-01-262-4160, 01-262-4160, 5340012624160, 012624160
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 53 | AUG 28, 1987 | 01-262-4160 | 20354 ( BRACKET, DOUBLE ANGLE ) |
REFERENCE DRAWINGS & PICTURES
CORNER RADIUS
FOUR HOLES
CORNER RADIUS
FOUR HOLES
ADJACENT ANGLES
Cross Reference | NSN 5340-01-262-4160
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| 015-0344-001 | 71468 | ITT CORPORATIONDBA I T T CANNON |
| 015-0343-001 | 71468 | ITT CORPORATIONDBA I T T CANNON |
| 227-1035-002 | 71468 | ITT CORPORATIONDBA I T T CANNON |
| 1134663G2 | 28528 | ITT INDUSTRIES INCITT AEROSPACE COMMUNICATIONS |
| 1134663G1 | 28528 | ITT INDUSTRIES INCITT AEROSPACE COMMUNICATIONS |
Technical Data | NSN 5340-01-262-4160
| Characteristic | Specifications |
|---|---|
| MATERIAL | ALUMINUM ALLOY 3003 |
| MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-359 FED SPEC SINGLE MATERIAL RESPONSE |
| SURFACE TREATMENT | ANODIZE |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-A-8625 MIL SPEC SINGLE TREATMENT RESPONSE |
| STYLE DESIGNATOR | ADJACENT ANGLES |
| FIRST LEG LENGTH | 1.141 INCHES MINIMUM AND 1.171 INCHES MAXIMUM |
| SECOND LEG LENGTH | 1.141 INCHES MINIMUM AND 1.171 INCHES MAXIMUM |
| FIRST LEG THICKNESS | 0.063 INCHES NOMINAL |
| SECOND LEG THICKNESS | 0.063 INCHES NOMINAL |
| CENTER SECTION HEIGHT | 1.675 INCHES MINIMUM AND 1.705 INCHES MAXIMUM |
| CENTER SECTION THICKNESS | 0.063 INCHES NOMINAL |
| FIRST LEG STYLE | CORNER RADIUS |
| FIRST LEG HOLE ARRANGEMENT STYLE | FOUR HOLES |
| FIRST LEG HOLE DIAMETER | 0.093 INCHES NOMINAL |
| FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH | 1.375 INCHES NOMINAL |
| FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG LENGTH | 0.937 INCHES NOMINAL |
| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.119 INCHES MINIMUM AND 0.134 INCHES MAXIMUM |
| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.102 INCHES MINIMUM AND 0.117 INCHES MAXIMUM |
| SECOND LEG RELATIONSHIP TO FIRST LEG | IDENTICAL |
| MOUNTING HOLE TYPE | PLAIN |
| END ITEM IDENTIFICATION | SACDIN MAINTENANCE |