NSN 5340-01-312-4977
Part Details | DOUBLE ANGLE BRACKET
5340-01-312-4977 A rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.
Alternate Parts: 9M671C2R, 9M671-C2R, 9M671C2R, 9M671-C2R, 10113136, 9M671C2R, 9M671-C2R, 5340-01-312-4977, 01-312-4977, 5340013124977, 013124977
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 53 | DEC 17, 1989 | 01-312-4977 | 20354 ( BRACKET, DOUBLE ANGLE ) |
REFERENCE DRAWINGS & PICTURES
CORNER RADIUS
NO HOLE
TWO HOLES
CORNER RADIUS
NO HOLE
TWO HOLES
ADJACENT ANGLES
Cross Reference | NSN 5340-01-312-4977
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| 9M671-C2R | 76301 | BOEING COMPANY, THEDBA BOEING |
| 9M671-C2R | 04967 | FASTENER SPECIALTY, INC. |
| 10113136 | A486G | NIMIKKEISTOKESKUS NCB FINLAND |
| 9M671-C2R | 59570 | TRICO MANUFACTURING INC. |
Technical Data | NSN 5340-01-312-4977
| Characteristic | Specifications |
|---|---|
| MATERIAL | ALUMINUM ALLOY 2024 AND ALUMINUM ALLOY 1230 |
| MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-250 TO 5,T3 FED SPEC SINGLE MATERIAL RESPONSE |
| SURFACE TREATMENT | PLASTIC EPOXY AND PLASTIC POLYAMIDE |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-P-23377 MIL SPEC SINGLE TREATMENT RESPONSE |
| STYLE DESIGNATOR | ADJACENT ANGLES |
| FIRST LEG LENGTH | 0.730 INCHES MINIMUM AND 0.770 INCHES MAXIMUM |
| SECOND LEG LENGTH | 1.000 INCHES NOMINAL |
| FIRST LEG THICKNESS | 0.063 INCHES NOMINAL |
| SECOND LEG THICKNESS | 0.063 INCHES NOMINAL |
| CENTER SECTION HEIGHT | 0.570 INCHES MINIMUM AND 0.690 INCHES MAXIMUM |
| CENTER SECTION WIDTH | 1.500 INCHES NOMINAL |
| CENTER SECTION THICKNESS | 0.063 INCHES NOMINAL |
| FIRST LEG ANGLE | 90.0 DEGREES NOMINAL |
| SECOND LEG ANGLE | 90.0 DEGREES NOMINAL |
| FIRST LEG STYLE | CORNER RADIUS |
| FIRST LEG WIDTH | 1.500 INCHES NOMINAL |
| FIRST LEG CORNER RADIUS | 0.220 INCHES NOMINAL |
| SECOND LEG WIDTH | 1.500 INCHES NOMINAL |
| SECOND LEG CORNER RADIUS | 0.220 INCHES NOMINAL |
| FIRST LEG HOLE ARRANGEMENT STYLE | TWO HOLES |
| FIRST LEG HOLE DIAMETER | 0.220 INCHES MINIMUM AND 0.230 INCHES MAXIMUM |
| FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH | 0.990 INCHES MINIMUM AND 1.010 INCHES MAXIMUM |
| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.240 INCHES MINIMUM AND 0.260 INCHES MAXIMUM |
| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.250 INCHES NOMINAL |
| SECOND LEG RELATIONSHIP TO FIRST LEG | NOT IDENTICAL |
| SECOND LEG STYLE | CORNER RADIUS |
| SECOND LEG HOLE ARRANGEMENT STYLE | NO HOLE |
| MOUNTING HOLE TYPE | PLAIN |
| FEATURES PROVIDED | NUT |
| SPECIAL FEATURES | RIGTH HAND NUT POSITION |