NSN 5340-01-315-1298
Part Details | DOUBLE ANGLE BRACKET
5340-01-315-1298 A rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.
Alternate Parts: 68A4127592002, 68A412759-2002, 68A4127592002, 68A412759-2002, 68A4127592002, 68A412759-2002, 5340-01-315-1298, 01-315-1298, 5340013151298, 013151298
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 53 | FEB 10, 1990 | 01-315-1298 | 20354 ( BRACKET, DOUBLE ANGLE ) |
REFERENCE DRAWINGS & PICTURES
END RADIUS AND TAPERED
TWO HOLES
END RADIUS AND TAPERED
TWO HOLES
ADJACENT ANGLES
Cross Reference | NSN 5340-01-315-1298
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| 68A412759-2002 | 76301 | BOEING COMPANY, THEDBA BOEING |
| 68A412759-2002 | 13002 | GOODRICH CORPORATIONDBA GOODRICH LANDING GEAR DIVISION |
| 68A412759-2002 | 55284 | HONEYWELL INTERNATIONAL INC.DBA HONEYWELL |
Technical Data | NSN 5340-01-315-1298
| Characteristic | Specifications |
|---|---|
| MATERIAL | STEEL COMP 301 |
| MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-5059,301 1 TO 4 HARD MIL SPEC SINGLE MATERIAL RESPONSE |
| STYLE DESIGNATOR | ADJACENT ANGLES |
| FIRST LEG THICKNESS | 0.125 INCHES NOMINAL |
| SECOND LEG THICKNESS | 0.125 INCHES NOMINAL |
| CENTER SECTION THICKNESS | 0.125 INCHES NOMINAL |
| FIRST LEG ANGLE | 58.0 DEGREES NOMINAL |
| SECOND LEG ANGLE | 90.0 DEGREES NOMINAL |
| FIRST LEG HOLE ARRANGEMENT STYLE | TWO HOLES |
| SECOND LEG HOLE DIAMETER | 0.204 INCHES MINIMUM AND 0.210 INCHES MAXIMUM |
| SECOND LEG DISTANCE BETWEEN HOLE CENTERS ALONG LENGTH | 1.655 INCHES MINIMUM AND 1.665 INCHES MAXIMUM |
| SECOND LEG RELATIONSHIP TO FIRST LEG | NOT IDENTICAL |
| SECOND LEG STYLE | END RADIUS AND TAPERED |
| SECOND LEG HOLE ARRANGEMENT STYLE | TWO HOLES |
| MOUNTING HOLE TYPE | PLAIN |
| SPECIAL FEATURES | 1ST LEG HOLE DIMENSIONS ARE DIFFEERENT; ITEM IS NOT CSI BUT HAS CRITICAL FEATURES SUCH AS HEAT TREATMENT, SURFACE FINISH, OR MATERIAL TYPE AND SPECIAL INSP. REQ.S SUCH AS MAGNETIC PARTICLE INSP. OR FLUORESCENT PENETRANT INSPECTION |
| CRITICALITY CODE JUSTIFICATION | FEAT |