NSN 5340-01-320-3583
Part Details | DOUBLE ANGLE BRACKET
5340-01-320-3583 A rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.
Alternate Parts: 1111748, 11-1-1748, 5340-01-320-3583, 01-320-3583, 5340013203583, 013203583
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 53 | MAY 23, 1990 | 01-320-3583 | 20354 ( BRACKET, DOUBLE ANGLE ) |
REFERENCE DRAWINGS & PICTURES
SQUARE
TWO HOLES
SQUARE
TWO HOLES
DOUBLE ANGLE
Cross Reference | NSN 5340-01-320-3583
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| 11-1-1748 | 81337 | ARMY, UNITED STATES DEPARTMENT OFTHE |
Technical Data | NSN 5340-01-320-3583
| Characteristic | Specifications |
|---|---|
| MATERIAL | STEEL COMP 4140 |
| MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-18729,COND A MIL SPEC SINGLE MATERIAL RESPONSE |
| SURFACE TREATMENT | PHOSPHATE |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | DOD-P-16232,TY M,CL 4 MIL SPEC SINGLE TREATMENT RESPONSE |
| STYLE DESIGNATOR | DOUBLE ANGLE |
| FIRST LEG LENGTH | 1.094 INCHES MINIMUM AND 1.156 INCHES MAXIMUM |
| SECOND LEG LENGTH | 1.6826 INCHES NOMINAL |
| FIRST LEG THICKNESS | 0.1196 INCHES NOMINAL |
| SECOND LEG THICKNESS | 0.1196 INCHES NOMINAL |
| CENTER SECTION HEIGHT | 0.5576 INCHES NOMINAL |
| CENTER SECTION WIDTH | 6.969 INCHES MINIMUM AND 7.031 INCHES MAXIMUM |
| CENTER SECTION THICKNESS | 0.1196 INCHES NOMINAL |
| FIRST LEG ANGLE | 90.0 DEGREES NOMINAL |
| SECOND LEG ANGLE | 90.0 DEGREES NOMINAL |
| FIRST LEG STYLE | SQUARE |
| FIRST LEG WIDTH | 6.969 INCHES MINIMUM AND 7.031 INCHES MAXIMUM |
| SECOND LEG WIDTH | 6.969 INCHES MINIMUM AND 7.031 INCHES MAXIMUM |
| FIRST LEG HOLE ARRANGEMENT STYLE | TWO HOLES |
| FIRST LEG HOLE DIAMETER | 0.406 INCHES NOMINAL |
| FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH | 6.000 INCHES NOMINAL |
| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.469 INCHES MINIMUM AND 0.531 INCHES MAXIMUM |
| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.500 INCHES NOMINAL |
| SECOND LEG HOLE DIAMETER | 0.390 INCHES NOMINAL |
| SECOND LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH | 6.000 INCHES NOMINAL |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.469 INCHES MINIMUM AND 0.531 INCHES MAXIMUM |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.438 INCHES NOMINAL |
| SECOND LEG RELATIONSHIP TO FIRST LEG | NOT IDENTICAL |
| SECOND LEG STYLE | SQUARE |
| SECOND LEG HOLE ARRANGEMENT STYLE | TWO HOLES |
| MOUNTING HOLE TYPE | PLAIN |