NSN 5340-01-327-4354
Part Details | DOUBLE ANGLE BRACKET
5340-01-327-4354 A rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.
Alternate Parts: C5088333, C5088333, 5340-01-327-4354, 01-327-4354, 5340013274354, 013274354
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 53 | OCT 14, 1990 | 01-327-4354 | 20354 ( BRACKET, DOUBLE ANGLE ) |
REFERENCE DRAWINGS & PICTURES
SQUARE
CUT OUT
NO HOLE
TWO HOLES
SQUARE
CUT OUT
NO HOLE
TWO HOLES
ADJACENT ANGLES
Cross Reference | NSN 5340-01-327-4354
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| C5088333 | 23667 | SMITHS DETECTION, INC.DIV EDGEWOOD |
| C5088333 | 57946 | US ARMY COMBAT SURVEILLANCE ANDTARGET ACQUISITION LABORATORY |
Technical Data | NSN 5340-01-327-4354
| Characteristic | Specifications |
|---|---|
| MATERIAL | 5$DAL6061 |
| MATERIAL DOCUMENT AND CLASSIFICATION | BQQ-A-200 TO 11,T651$CQQ-A-200 TO 8,T651 1ST MATERIAL RESPONSE |
| SURFACE TREATMENT | ANODIZE |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-F-14072 MIL SPEC SINGLE TREATMENT RESPONSE |
| STYLE DESIGNATOR | ADJACENT ANGLES |
| FIRST LEG LENGTH | 0.428 INCHES NOMINAL |
| SECOND LEG LENGTH | 0.720 INCHES NOMINAL |
| FIRST LEG THICKNESS | 0.250 INCHES NOMINAL |
| SECOND LEG THICKNESS | 0.150 INCHES NOMINAL |
| CENTER SECTION HEIGHT | 1.400 INCHES NOMINAL |
| CENTER SECTION WIDTH | 3.250 INCHES NOMINAL |
| CENTER SECTION THICKNESS | 0.150 INCHES NOMINAL |
| FIRST LEG ANGLE | 90.0 DEGREES NOMINAL |
| SECOND LEG ANGLE | 90.0 DEGREES NOMINAL |
| FIRST LEG STYLE | SQUARE |
| FIRST LEG WIDTH | 3.250 INCHES NOMINAL |
| SECOND LEG WIDTH | 3.250 INCHES NOMINAL |
| SECOND LEG CUTOUT LENGTH | 0.480 INCHES NOMINAL |
| SECOND LEG CUTOUT WIDTH | 2.290 INCHES NOMINAL |
| FIRST LEG HOLE ARRANGEMENT STYLE | TWO HOLES |
| FIRST LEG HOLE DIAMETER | 0.089 INCHES NOMINAL |
| FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH | 2.750 INCHES NOMINAL |
| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.250 INCHES NOMINAL |
| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.125 INCHES NOMINAL |
| SECOND LEG RELATIONSHIP TO FIRST LEG | NOT IDENTICAL |
| SECOND LEG STYLE | CUT OUT |
| SECOND LEG HOLE ARRANGEMENT STYLE | NO HOLE |
| MOUNTING HOLE TYPE | THREADED AND PLAIN |
| SPECIAL FEATURES | SECOND LEG HAS TWO NOTCHES INSIDE OF CUTOUTS,0.188 IN. MIN AND 0.193 IN. MAX HOLE DIA TWO PLACES CENTER SECTION |