NSN 5340-01-361-3568
Part Details | DOUBLE ANGLE BRACKET
5340-01-361-3568 A rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.
Alternate Parts: 704AS3642, 8936421, 893642-1, 5340-01-361-3568, 01-361-3568, 5340013613568, 013613568
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 53 | JUL 15, 1992 | 01-361-3568 | 20354 ( BRACKET, DOUBLE ANGLE ) |
REFERENCE DRAWINGS & PICTURES
SQUARE
CHAMFERED ENDS
ONE HOLE
TWO HOLES
SQUARE
CHAMFERED ENDS
ONE HOLE
TWO HOLES
DOUBLE ANGLE
Cross Reference | NSN 5340-01-361-3568
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| 704AS3642 | 30003 | NAVAL AIR SYSTEMS COMMAND MANAGEDORIGINAL DESIGN ACTIVITY NOT |
| 893642-1 | 96214 | RAYTHEON COMPANYDBA RAYTHEON |
Technical Data | NSN 5340-01-361-3568
| Characteristic | Specifications |
|---|---|
| MATERIAL | STEEL COMP 304 |
| MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-766 COND A FED SPEC SINGLE MATERIAL RESPONSE |
| SURFACE TREATMENT | PASSIVATE |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-35 TY 1 FED SPEC SINGLE TREATMENT RESPONSE |
| STYLE DESIGNATOR | DOUBLE ANGLE |
| FIRST LEG LENGTH | 0.437 INCHES NOMINAL |
| SECOND LEG LENGTH | 0.630 INCHES NOMINAL |
| FIRST LEG THICKNESS | 0.058 INCHES MINIMUM AND 0.068 INCHES MAXIMUM |
| SECOND LEG THICKNESS | 0.058 INCHES MINIMUM AND 0.068 INCHES MAXIMUM |
| CENTER SECTION HEIGHT | 0.786 INCHES NOMINAL |
| CENTER SECTION THICKNESS | 0.058 INCHES MINIMUM AND 0.068 INCHES MAXIMUM |
| FIRST LEG ANGLE | 90.0 DEGREES NOMINAL |
| SECOND LEG ANGLE | 83.0 DEGREES NOMINAL |
| FIRST LEG STYLE | CHAMFERED ENDS |
| FIRST LEG WIDTH | 0.312 INCHES NOMINAL |
| FIRST LEG END WIDTH | 0.132 INCHES NOMINAL |
| SECOND LEG WIDTH | 1.200 INCHES NOMINAL |
| FIRST LEG CHAMFER ANGLE | 40.0 DEGREES MINIMUM AND 50.0 DEGREES MAXIMUM |
| FIRST LEG HOLE ARRANGEMENT STYLE | ONE HOLE |
| FIRST LEG HOLE DIAMETER | 0.125 INCHES MINIMUM AND 0.127 INCHES MAXIMUM |
| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.156 INCHES NOMINAL |
| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.156 INCHES NOMINAL |
| SECOND LEG HOLE DIAMETER | 0.154 INCHES MINIMUM AND 0.158 INCHES MAXIMUM |
| SECOND LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH | 0.700 INCHES NOMINAL |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.250 INCHES NOMINAL |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.250 INCHES NOMINAL |
| SECOND LEG RELATIONSHIP TO FIRST LEG | NOT IDENTICAL |
| SECOND LEG STYLE | SQUARE |
| SECOND LEG HOLE ARRANGEMENT STYLE | TWO HOLES |
| MOUNTING HOLE TYPE | PLAIN |