Part Details | SHIM

5365-00-256-3438 A thin flat metal or plastic item of various peripheral shapes having a solid or laminated cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole and having a solid rectangular cross-section use DISK, SOLID, PLAIN. Items with either (1) a solid (not laminated) cross-section, or (2) a non-separable laminated cross-section with one hole centrally located, must have a thickness less than 0.006 inch (0.152 mm) for items less than 1/4 inch (6.35 mm) outside diameter or shortest distance across peripheral flats, and less than 0.016 inch (0.406 mm) for items 1/4 inch (6.35 mm) or more outside diameter, or shortest distance across peripheral flats. For items with thickness greater than those indicated above, see SPACER, PLATE; WASHER, FLAT and SPACER, RING. When thickness and/or outside diameter or shortest distance across peripheral flats is designated as a tolerance dimension, the maximum dimension will be used to determine compliance. See also SHIM STOCK, LAMINATED; SHIM STOCK ASSORTMENT, GASKET; and BEARING, WASHER, THRUST.

Alternate Parts: 51MCD1216PC58, 51MCD1216PC54, F563PC12, F186KPC12, F186FPC12, SK5058NPC11X58INCH, SK5058NPC11X5-8INCH, SK5054NPC11X58INCH, SK5054NPC11X5-8INCH, SK5037PC22114, SK5037PC221-14, SK5037PC1438, SK5037PC14-3-8, SK5031NPC148, SK5031NCPC14A, SK5031NBPC14A, SK5031NAPC14A, P215EPC14A, P214EPC14A, P207BPC14A, P206CPC14A, P204CPC14A, P203BPC14A, D22114, D221-14, 202174PC12, 555005900PC12, 55500-5900PC12, 5150059813PC12, 51500-59-813PC12, 3135959PC22114, 313-59-59PC221-14, 3135959PC1438, 313-59-59PC14-3-8, 25359038PC14A, 253-59-038PC14A, 2285905PC14A, 228-59-05PC14A, 21259038PC14A, 212-59-038PC14A, 5365-00-256-3438, 00-256-3438, 5365002563438, 002563438

REFERENCE DRAWINGS & PICTURES

CIRCULAR