Part Details | SHIM

5365-00-275-0677 A thin flat metal or plastic item of various peripheral shapes having a solid or laminated cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole and having a solid rectangular cross-section use DISK, SOLID, PLAIN. Items with either (1) a solid (not laminated) cross-section, or (2) a non-separable laminated cross-section with one hole centrally located, must have a thickness less than 0.006 inch (0.152 mm) for items less than 1/4 inch (6.35 mm) outside diameter or shortest distance across peripheral flats, and less than 0.016 inch (0.406 mm) for items 1/4 inch (6.35 mm) or more outside diameter, or shortest distance across peripheral flats. For items with thickness greater than those indicated above, see SPACER, PLATE; WASHER, FLAT and SPACER, RING. When thickness and/or outside diameter or shortest distance across peripheral flats is designated as a tolerance dimension, the maximum dimension will be used to determine compliance. See also SHIM STOCK, LAMINATED; SHIM STOCK ASSORTMENT, GASKET; and BEARING, WASHER, THRUST.

Alternate Parts: GJN76121PC12B, GJN76-121PC12B, GJN76120PC12B, GJN76-120PC12B, GJN76327PC52B, GJN76-327PC52B, GJN76323PC52B, GJN76-323PC52B, NP8106PC34B, NP8103PC34B, NP8017PCP2995C6B, NP8016PCP2994C6B, NP7096PC34B, NP7095PC34B, NP4099PC342, NP4099PC34-2, NP4098PC342, NP4098PC34-2, NP2202PCP2995C6B, NP2202PCP2994C6B, NP2163PC34B, NP2160PC34B, NP2124PC34B, NP2122PC34B, NP2028PCP2995C6B, NP2027PCP2994C6B, NP13304PC52B, NP13300PC52B, NP11273PC2, NP11272PC36B, NP11271PC36B, NP11264PC39B, NP11260PC39B, NP1096PC34B, NP1095PC34B, NP10096PC34B, NP10095PC34B, GJN76306PC50A, GJN76-306PC50A, GJN76301PC50A, GJN76-301PC50A, 5365-00-275-0677, 00-275-0677, 5365002750677, 002750677

REFERENCE DRAWINGS & PICTURES

CIRCULAR