Part Details | SHIM

5365-00-338-9115 A thin flat metal or plastic item of various peripheral shapes having a solid or laminated cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole and having a solid rectangular cross-section use DISK, SOLID, PLAIN. Items with either (1) a solid (not laminated) cross-section, or (2) a non-separable laminated cross-section with one hole centrally located, must have a thickness less than 0.006 inch (0.152 mm) for items less than 1/4 inch (6.35 mm) outside diameter or shortest distance across peripheral flats, and less than 0.016 inch (0.406 mm) for items 1/4 inch (6.35 mm) or more outside diameter, or shortest distance across peripheral flats. For items with thickness greater than those indicated above, see SPACER, PLATE; WASHER, FLAT and SPACER, RING. When thickness and/or outside diameter or shortest distance across peripheral flats is designated as a tolerance dimension, the maximum dimension will be used to determine compliance. See also SHIM STOCK, LAMINATED; SHIM STOCK ASSORTMENT, GASKET; and BEARING, WASHER, THRUST.

Alternate Parts: AFC5038A, 9AF9B2435CPC2, AFB5038A, 9AF9B2435A1PC2, 7AF9B2435CPC2, 7AF9B2435APC2, 22AF10C2435CPC2, 22AF10C2435APC2, 16102064, 15AF9B2435CPC2, 15AF9B2435APC2, 13AF10B2435QPC2, 13AF10B2435NPC2, 10AF10C2435CPC2, 10AF10C2435APC2, NAFB5038A, MAFB2435CPC2, MAFB2435APC2, CAFB5038A, 16102064, AM55S410131PC2, AM55S41-0131PC2, AM55S410128PC2, AM55S41-0128PC2, 81221S41125PC2, 81221S41-125PC2, 81221S41122ALT2PC2, 81221S41-122ALT2PC2, 81221S41120ALT2PC2, 81221S41-120ALT2PC2, SS228S410120PC2, SS228S41-0120PC2, PC461S410156PC2, PC461S41-0156PC2, PC451S410154PC2, PC451S41-0154PC2, BB55S610910PC2, BB55S61-0910PC2, BB55S610908PC2, BB55S61-0908PC2, AVP10S410644PC2, AVP10S41-0644PC2, AVP10S410642PC2, AVP10S41-0642PC2, AS11S410727PC2, AS11S41-0727PC2, AS11S410725PC2, AS11S41-0725PC2, 5365-00-338-9115, 00-338-9115, 5365003389115, 003389115

REFERENCE DRAWINGS & PICTURES