NSN 5365-00-858-8554

Part Details | RING SPACER

5365-00-858-8554 A circular-shaped item designed to maintain predetermined distance between assembled parts and/or for distributing pressure or preventing endwise movement between member parts. It has a solid cross-section and two flat parallel bearing surfaces. The distance between the bearing surfaces perpendicular to the axis of the centrally located hole shall not exceed 25 percent of the outside diameter. The diameter of the centrally located hole must exceed 75 percent of the outside diameter. Excludes laminated items. For items manufactured from impregnated graphite or lubricated nonmetallic materials, excluding felt or plastics, see GASKET. For items manufactured from lubricated plastics, see BEARING, WASHER, THRUST. For items manufactured from lubricated felt, see FELT, MECHANICAL, PREFORMED. Excludes DISK, VALVE; INSULATOR WASHER; and SHIM. See also SPACER, PLATE and SPACER, SLEEVE.

Alternate Parts: 546737, 5365-00-858-8554, 00-858-8554, 5365008588554, 008588554

Supply Group (FSG) NSN Assigned NIIN Item Name Code (INC)
53JAN 01, 196300-858-855424307 ( SPACER, RING )
REFERENCE DRAWINGS & PICTURES
Cross Reference | NSN 5365-00-858-8554
Part Number Cage Code Manufacturer
54673773030HAMILTON SUNDSTRAND CORPORATION
Technical Data | NSN 5365-00-858-8554
Characteristic Specifications
MATERIAL STEEL COMP 416SE
MATERIAL DOCUMENT AND CLASSIFICATIONAMS 5610 ASSN STD SINGLE MATERIAL RESPONSE
HARDNESS RATINGRCB30.0 ROCKWELL C MAXIMUM AND 38.0 ROCKWELL C MAXIMUM
OVERALL THICKNESS0.700 INCHES NOMINAL
INSIDE DIAMETER5.0000 INCHES MINIMUM AND 5.0007 INCHES MAXIMUM
OUTSIDE DIAMETER5.748 INCHES MINIMUM AND 5.752 INCHES MAXIMUM
SPECIAL FEATURESLEFT ID COUNTERBORED TO 5.140 IN.DIA BY 0.147 IN. DEEP W/ONE GROOVE 0.084 IN. W BY 5.245 IN. DIA LOCATED 0.063 IN. FROM LEFT END AND ONE CENTRAL INTERNAL GROOVE 0.190 IN. W BY 5.237 IN.DIA,TWO HOLES 0.062 IN. DIA DRILLED 0.300 IN. DEEP 180 DEG APART ON OD 0.167 FROM LEFT END AT 13 DEG ANGLE