NSN 5365-01-166-8120
Part Details | RING SPACER
5365-01-166-8120 A circular-shaped item designed to maintain predetermined distance between assembled parts and/or for distributing pressure or preventing endwise movement between member parts. It has a solid cross-section and two flat parallel bearing surfaces. The distance between the bearing surfaces perpendicular to the axis of the centrally located hole shall not exceed 25 percent of the outside diameter. The diameter of the centrally located hole must exceed 75 percent of the outside diameter. Excludes laminated items. For items manufactured from impregnated graphite or lubricated nonmetallic materials, excluding felt or plastics, see GASKET. For items manufactured from lubricated plastics, see BEARING, WASHER, THRUST. For items manufactured from lubricated felt, see FELT, MECHANICAL, PREFORMED. Excludes DISK, VALVE; INSULATOR WASHER; and SHIM. See also SPACER, PLATE and SPACER, SLEEVE.
Alternate Parts: 20414408, 2041440-8, 20408988, 2040898-8, 10318654, 5365-01-166-8120, 01-166-8120, 5365011668120, 011668120
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 53 | NOV 17, 1983 | 01-166-8120 | 24307 ( SPACER, RING ) |
REFERENCE DRAWINGS & PICTURES
Cross Reference | NSN 5365-01-166-8120
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| 2041440-8 | 70210 | HONEYWELL INTERNATIONAL INC.DBA HONEYWELL |
| 2040898-8 | 70210 | HONEYWELL INTERNATIONAL INC.DBA HONEYWELL |
| 10318654 | A486G | NIMIKKEISTOKESKUS NCB FINLAND |
Technical Data | NSN 5365-01-166-8120
| Characteristic | Specifications |
|---|---|
| MATERIAL | STEEL COMP E52100 |
| MATERIAL DOCUMENT AND CLASSIFICATION | AMS 6444 ASSN STD SINGLE MATERIAL RESPONSE |
| HARDNESS RATING | RSB89.0 ROCKWELL SUPERFICIAL 15-N |
| OVERALL THICKNESS | 0.091 INCHES MINIMUM AND 0.093 INCHES MAXIMUM |
| INSIDE DIAMETER | 1.357 INCHES MINIMUM AND 1.358 INCHES MAXIMUM |
| OUTSIDE DIAMETER | 1.740 INCHES MINIMUM AND 1.760 INCHES MAXIMUM |
| TEST DATA DOCUMENT | 70210-EMS 92322,LASS B DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |