NSN 5365-01-436-3589
Part Details | SHIM
5365-01-436-3589 A thin flat metal or plastic item of various peripheral shapes having a solid or laminated cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole and having a solid rectangular cross-section use DISK, SOLID, PLAIN. Items with either (1) a solid (not laminated) cross-section, or (2) a non-separable laminated cross-section with one hole centrally located, must have a thickness less than 0.006 inch (0.152 mm) for items less than 1/4 inch (6.35 mm) outside diameter or shortest distance across peripheral flats, and less than 0.016 inch (0.406 mm) for items 1/4 inch (6.35 mm) or more outside diameter, or shortest distance across peripheral flats. For items with thickness greater than those indicated above, see SPACER, PLATE; WASHER, FLAT and SPACER, RING. When thickness and/or outside diameter or shortest distance across peripheral flats is designated as a tolerance dimension, the maximum dimension will be used to determine compliance. See also SHIM STOCK, LAMINATED; SHIM STOCK ASSORTMENT, GASKET; and BEARING, WASHER, THRUST.
Alternate Parts: 326398921, 3263989-21, 5365-01-436-3589, 01-436-3589, 5365014363589, 014363589
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 53 | SEP 17, 1996 | 01-436-3589 | 20349 ( SHIM ) |
REFERENCE DRAWINGS & PICTURES
NON-CIRCULAR W/BOLT HOLES
Cross Reference | NSN 5365-01-436-3589
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| 3263989-21 | 82577 | RAYTHEON COMPANYDBA RAYTHEON |
Technical Data | NSN 5365-01-436-3589
| Characteristic | Specifications |
|---|---|
| MATERIAL | ALUMINUM ALLOY 1100 |
| MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-250 TO 1,TEMP H14 FED SPEC SINGLE MATERIAL RESPONSE |
| SURFACE TREATMENT | CHROMATE |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-C-5541,CLASS 1A MIL SPEC SINGLE TREATMENT RESPONSE |
| CONSTRUCTION | ONE-PIECE |
| OVERALL THICKNESS | 0.010 INCHES NOMINAL |
| BOLT HOLE QUANTITY | 4 |
| APERTURE WIDTH | 0.398 INCHES MINIMUM AND 0.402 INCHES MAXIMUM |
| APERTURE LENGTH | 0.898 INCHES MINIMUM AND 0.902 INCHES MAXIMUM |
| STYLE DESIGNATOR | NON-CIRCULAR W/BOLT HOLES |
| HOLE DIAMETER | 0.146 INCHES MINIMUM AND 0.152 INCHES MAXIMUM |
| OVERALL LENGTH | 1.790 INCHES MINIMUM AND 1.810 INCHES MAXIMUM |
| OVERALL WIDTH | 0.865 INCHES MINIMUM AND 0.885 INCHES MAXIMUM |
| INSIDE CORNER RADIUS | 0.015 INCHES NOMINAL |
| CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG WIDTH | 0.488 INCHES MINIMUM AND 0.508 INCHES MAXIMUM |
| CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH | 1.490 INCHES MINIMUM AND 1.510 INCHES MAXIMUM |
| OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG WIDTH | 0.179 INCHES MINIMUM AND 0.199 INCHES MAXIMUM |
| OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG LENGTH | 0.140 INCHES MINIMUM AND 0.160 INCHES MAXIMUM |
| OUTSIDE EDGE TO INSIDE EDGE SMALLEST DISTANCE ALONG WIDTH | 0.237 INCHES MINIMUM AND 0.239 INCHES MAXIMUM |
| OUTSIDE EDGE TO INSIDE EDGE SMALLEST DISTANCE ALONG LENGTH | 0.449 INCHES MINIMUM AND 0.451 INCHES MAXIMUM |
| SPECIAL FEATURES | MASK ALL MATING SURFACES AND HOLES; EPOXY PRIME COAT ONLY OUTSIDE EDGES OF SHIM PER RPR17003 TYPE I OR II; ORIGINAL NAME-SPACER,PLATE; OUTSIDE CORNERS ARE CHAMFERED 0.100 IN. X 45.0 DEG |
| END ITEM IDENTIFICATION | F-15I |