NSN 5905-00-007-1906
Part Details | WIRE WOUND FIXED RESISTOR
5905-00-007-1906 A resistor whose ohmic value cannot be adjusted or varied. The resistance element consists of high resistance wire (or ribbon) either wound on an insulated form or constructed so as to be self supporting. Opposition to the flow of current is an inherent property of the resistance wire and is manifest by the heat dissipation in the resistor. Excludes SUPPRESSOR, IGNITION INTERFERENCE.
Alternate Parts: 5753050029, 57530500-29, 5753050029, 57530500-29, 1200NS19601, 1200NS1960-1, NS2BU196, 5905-00-007-1906, 00-007-1906, 5905000071906, 000071906
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 59 | JUL 06, 1972 | 00-007-1906 | 00010 ( RESISTOR, FIXED, WIRE WOUND ) |
REFERENCE DRAWINGS & PICTURES
AXIAL TERMINAL EACH END
Cross Reference | NSN 5905-00-007-1906
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| 57530500-29 | 27963 | GENERAL DYNAMICS INFORMATION SYSTEMSINC. |
| 57530500-29 | 3CYA2 | GENERAL DYNAMICS MISSION SYSTEMS,INC |
| 1200NS1960-1 | 00213 | STRUTHERS-DUNN LLC |
| NS2BU196 | 91637 | VISHAY DALE ELECTRONICS, LLCDBA VISHAY INTERTECHNOLOGY |
Technical Data | NSN 5905-00-007-1906
| Characteristic | Specifications |
|---|---|
| ELECTRICAL RESISTANCE | 196.000 OHMS |
| RESISTANCE TOLERANCE IN PERCENT | M1.000/P1.000 |
| POWER DISSIPATION RATING IN WATTS | 3.000 FREE AIR |
| AMBIENT TEMP IN DEG CELSIUS AT FULL RATED POWER | 25.0 |
| AMBIENT TEMP IN DEG CELSIUS AT ZERO PERCENT RATED POWER | 275.0 |
| TEMP COEFFICIENT OF RESISTANCE IN PPM PER DEG CELSIUS | M20.0/P20.0 |
| TEMP RANGE OF TEMP COEFFICIENT IN DEG CELSIUS | M55.0/P275.0 |
| INCLOSURE METHOD | ENCAPSULATED |
| STYLE DESIGNATOR | 4 AXIAL TERMINAL EACH END |
| BODY DIAMETER | 0.218 INCHES MAXIMUM |
| BODY LENGTH | 0.622 INCHES MAXIMUM |
| TERMINAL TYPE | WIRE LEAD |
| RELIABILITY INDICATOR | NOT ESTABLISHED |
| TERMINAL LENGTH | 1.000 INCHES MINIMUM |
| CUBIC MEASURE | 0.023 CUBIC INCHES |
| TEST DATA DOCUMENT | 27963-57530500 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |