NSN 5910-00-022-5499
Part Details | CERAMIC DIELECTRIC FIXED CAPACITOR
5910-00-022-5499 A capacitor, whose capacitance value cannot be adjusted or varied, having a ceramic dielectric. It may be a single unit, or consist of two or more fixed units which cannot be separated.
Alternate Parts: B605001191, 4753A151K, 4753A-151K, C11A151K, SSM150911, SSM150-911, 5910-00-022-5499, 00-022-5499, 5910000225499, 000225499
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 59 | MAY 13, 1968 | 00-022-5499 | 00007 ( CAPACITOR, FIXED, CERAMIC DIELECTRIC ) |
REFERENCE DRAWINGS & PICTURES
W/O MTG FACILITIES, TERMINALS ON OPPOSITE SURFACES
NO COMMON OR GROUNDED ELECTRODE(S)
Cross Reference | NSN 5910-00-022-5499
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| B605001191 | 88818 | KEARFOTT CORPORATIONDBA KEARFOTT |
| 4753A-151K | 16546 | MEPCO/CENTRALABA NORTH AMERICAN PHILIPS CO |
| C11A151K | 16546 | MEPCO/CENTRALABA NORTH AMERICAN PHILIPS CO |
| SSM150-911 | 86355 | POLAR MFG CO |
Technical Data | NSN 5910-00-022-5499
| Characteristic | Specifications |
|---|---|
| CAPACITANCE VALUE PER SECTION | 150.000 PICOFARADS SINGLE SECTION |
| TOLERANCE RANGE PER SECTION | -10.00 TO +10.00 PERCENT SINGLE SECTION |
| NONDERATED CONTINUOUS VOLTAGE RATING AND TYPE PER SECTION | 100.0 DC SINGLE SECTION |
| NONDERATED OPERATING TEMP | -55.0 DEG CELSIUS MINIMUM AND 125.0 DEG CELSIUS MAXIMUM |
| BODY STYLE | W/O MTG FACILITIES, TERMINALS ON OPPOSITE SURFACES |
| BODY LENGTH | 0.160 INCHES NOMINAL |
| BODY WIDTH | 0.070 INCHES NOMINAL |
| BODY HEIGHT | 0.070 INCHES NOMINAL |
| SCHEMATIC DIAGRAM DESIGNATOR | NO COMMON OR GROUNDED ELECTRODE(S) |
| TERMINAL TYPE AND QUANTITY | 2 UNINSULATED WIRE LEAD |
| TERMINAL LENGTH | 1.250 INCHES MINIMUM |
| CASE MATERIAL | PLASTIC |
| POWER FACTOR AT REFERENCE TEMP IN PERCENT | 2.0000 |
| RELIABILITY INDICATOR | NOT ESTABLISHED |
| TEST DATA DOCUMENT | 14804-B605001191 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |