NSN 5910-00-114-0463
Part Details | ELECTROLYTIC FIXED CAPACITOR
5910-00-114-0463 A capacitor, whose capacitance value cannot be adjusted or varied, having a chemically formed film as the dielectric. It may be a single unit, or consist of two or more fixed units which cannot be separated.
Alternate Parts: M39006191005, M39006-19-1005, MILC3900619, MILC39006-19, 5910-00-114-0463, 00-114-0463, 5910001140463, 001140463
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 59 | MAR 28, 1973 | 00-114-0463 | 00008 ( CAPACITOR, FIXED, ELECTROLYTIC ) |
REFERENCE DRAWINGS & PICTURES
W/O MTG FACILITIES, TERMINAL(S) ON ONE END
ELECTRODE(S) GROUNDED TO CASE, W/GND TERMINAL
Cross Reference | NSN 5910-00-114-0463
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| M39006-19-1005 | 81349 | MILITARY SPECIFICATIONSPROMULGATED BY MILITARY |
| MILC39006-19 | 81349 | MILITARY SPECIFICATIONSPROMULGATED BY MILITARY |
Technical Data | NSN 5910-00-114-0463
| Characteristic | Specifications |
|---|---|
| CAPACITANCE VALUE PER SECTION | 80.000 MICROFARADS SINGLE SECTION |
| TOLERANCE RANGE PER SECTION | -15.00 TO +75.00 PERCENT SINGLE SECTION |
| NONDERATED CONTINUOUS VOLTAGE RATING AND TYPE PER SECTION | 60.0 DC SINGLE SECTION |
| NONDERATED OPERATING TEMP | -55.0 DEG CELSIUS MINIMUM AND 85.0 DEG CELSIUS MAXIMUM |
| BODY STYLE | W/O MTG FACILITIES, TERMINAL(S) ON ONE END |
| BODY DIAMETER | 0.875 INCHES NOMINAL |
| BODY LENGTH | 0.732 INCHES NOMINAL |
| SCHEMATIC DIAGRAM DESIGNATOR | ELECTRODE(S) GROUNDED TO CASE, W/GND TERMINAL |
| TERMINAL TYPE AND QUANTITY | 1 SOLDER STUD AND 1 TAB, SOLDER LUG |
| TERMINAL LENGTH | 0.406 INCHES NOMINAL |
| CASE MATERIAL | METAL |
| CAPACITIVE ELECTRODE MATERIAL | TANTALUM |
| DISSIPATION FACTOR AT REFERENCE TEMP IN PERCENT | 16.0000 |
| DC LEAKAGE AT REFERENCE TEMP | 19.000 MICROAMPERES |
| ELECTRICAL POLARIZATION | POLARIZED |
| RELIABILITY INDICATOR | ESTABLISHED |
| RELIABILITY FAILURE RATE LEVEL IN PERCENT | 2.0000 |
| FEATURES PROVIDED | HERMETICALLY SEALED CASE |
| TEST DATA DOCUMENT | 81349-MIL-C-39006 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
| SPECIFICATION/STANDARD DATA | 81349-MIL-C-39006 TO 19 GOVERNMENT SPECIFICATION |
| TERMINAL SURFACE TREATMENT | SOLDER |
| ANODE TYPE | SOLID |
| IMPEDANCE AT MINIMUM OPERATING TEMP IN OHMS | 35.0 |
| DC LEAKAGE AT MAXIMUM OPERATING TEMP | 95.0 MICROAMPERES |