NSN 5910-00-139-6677
Part Details | ELECTROLYTIC FIXED CAPACITOR
5910-00-139-6677 A capacitor, whose capacitance value cannot be adjusted or varied, having a chemically formed film as the dielectric. It may be a single unit, or consist of two or more fixed units which cannot be separated.
Alternate Parts: 9082300050, 908-230-0050, 137D566X0075C2, 5910-00-139-6677, 00-139-6677, 5910001396677, 001396677
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 59 | SEP 01, 1971 | 00-139-6677 | 00008 ( CAPACITOR, FIXED, ELECTROLYTIC ) |
REFERENCE DRAWINGS & PICTURES
W/O MTG FACILITIES, AXIAL TERMINALS
ELECTRODE(S) GROUNDED TO CASE, W/GND TERMINAL
Cross Reference | NSN 5910-00-139-6677
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| 908-230-0050 | 95542 | NORTHROP GRUMMAN SYSTEMS CORPORATION |
| 137D566X0075C2 | 56289 | SPRAGUE ELECTRIC COWORLD HQS |
Technical Data | NSN 5910-00-139-6677
| Characteristic | Specifications |
|---|---|
| CAPACITANCE VALUE PER SECTION | 56.000 MICROFARADS SINGLE SECTION |
| TOLERANCE RANGE PER SECTION | -20.00 TO +20.00 PERCENT SINGLE SECTION |
| NONDERATED CONTINUOUS VOLTAGE RATING AND TYPE PER SECTION | 75.0 DC SINGLE SECTION |
| NONDERATED OPERATING TEMP | -55.0 DEG CELSIUS MINIMUM AND 85.0 DEG CELSIUS MAXIMUM |
| BODY STYLE | W/O MTG FACILITIES, AXIAL TERMINALS |
| BODY DIAMETER | 0.406 INCHES MAXIMUM |
| BODY LENGTH | 0.891 INCHES MAXIMUM |
| SCHEMATIC DIAGRAM DESIGNATOR | ELECTRODE(S) GROUNDED TO CASE, W/GND TERMINAL |
| TERMINAL TYPE AND QUANTITY | 2 UNINSULATED WIRE LEAD |
| TERMINAL LENGTH | 2.250 INCHES NOMINAL |
| CASE MATERIAL | METAL |
| CASE INSULATION MATERIAL | PLASTIC |
| CAPACITIVE ELECTRODE MATERIAL | TANTALUM |
| EQUIVALENT SERIES RESISTANCE AT REFERENCE TEMP IN OHMS | 6.00 |
| DC LEAKAGE AT REFERENCE TEMP | 2.100 MICROAMPERES |
| ELECTRICAL POLARIZATION | POLARIZED |
| RELIABILITY INDICATOR | NOT ESTABLISHED |
| TEST DATA DOCUMENT | 95542-908230 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |
| TERMINAL SURFACE TREATMENT | SOLDER |
| IMPEDANCE AT MINIMUM OPERATING TEMP IN OHMS | 60.0 |