NSN 5910-00-221-2015
Part Details | CERAMIC DIELECTRIC FIXED CAPACITOR
5910-00-221-2015 A capacitor, whose capacitance value cannot be adjusted or varied, having a ceramic dielectric. It may be a single unit, or consist of two or more fixed units which cannot be separated.
Alternate Parts: ST1C001PS350005, 5910-00-221-2015, 00-221-2015, 5910002212015, 002212015
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 59 | FEB 07, 1969 | 00-221-2015 | 00007 ( CAPACITOR, FIXED, CERAMIC DIELECTRIC ) |
REFERENCE DRAWINGS & PICTURES
W/O MTG FACILITIES, AXIAL TERMINALS
NO COMMON OR GROUNDED ELECTRODE(S)
Cross Reference | NSN 5910-00-221-2015
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| ST1C001PS350005 | 22915 | NORTHROP GRUMMAN CORPELECTRONIC SYSTEMS DEFENSIVE SYSTEM |
Technical Data | NSN 5910-00-221-2015
| Characteristic | Specifications |
|---|---|
| CAPACITANCE VALUE PER SECTION | 47.000 PICOFARADS SINGLE SECTION |
| TOLERANCE RANGE PER SECTION | -10.00 TO +10.00 PERCENT SINGLE SECTION |
| NONDERATED CONTINUOUS VOLTAGE RATING AND TYPE PER SECTION | 50.0 DC SINGLE SECTION |
| VOLTAGE TEMP LIMITS PER SECTION IN PERCENT CAPACITANCE CHANGE | BCNM15.0 TO +15.0 WITHOUT VOLTAGE APPLIED |
| NONDERATED OPERATING TEMP | -65.0 DEG CELSIUS MINIMUM AND 85.0 DEG CELSIUS MAXIMUM |
| BODY STYLE | W/O MTG FACILITIES, AXIAL TERMINALS |
| BODY DIAMETER | 0.100 INCHES MAXIMUM |
| BODY LENGTH | 0.290 INCHES MAXIMUM |
| SCHEMATIC DIAGRAM DESIGNATOR | NO COMMON OR GROUNDED ELECTRODE(S) |
| TERMINAL TYPE AND QUANTITY | 2 UNINSULATED WIRE LEAD |
| CASE MATERIAL | PLASTIC |
| INSULATION RESISTANCE AT REFERENCE TEMP | 1000.0 MEGOHM-MICROFARADS |
| DISSIPATION FACTOR AT REFERENCE TEMP IN PERCENT | 2.500 |
| RELIABILITY INDICATOR | NOT ESTABLISHED |
| TEST DATA DOCUMENT | 22915-ST1001 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |
| SPECIAL TEST FEATURES | BURN-IN |
| TERMINAL SURFACE TREATMENT | SOLDER |