NSN 5910-00-232-1817
Part Details | ELECTROLYTIC FIXED CAPACITOR
5910-00-232-1817 A capacitor, whose capacitance value cannot be adjusted or varied, having a chemically formed film as the dielectric. It may be a single unit, or consist of two or more fixed units which cannot be separated.
Alternate Parts: 199720946, 1997209-46, CL65BL6R8KPE, 5910-00-232-1817, 00-232-1817, 5910002321817, 002321817
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 59 | OCT 28, 1970 | 00-232-1817 | 00008 ( CAPACITOR, FIXED, ELECTROLYTIC ) |
REFERENCE DRAWINGS & PICTURES
W/O MTG FACILITIES, AXIAL TERMINALS
ELECTRODE(S) GROUNDED TO CASE, W/GND TERMINAL
Cross Reference | NSN 5910-00-232-1817
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| 1997209-46 | 94580 | HONEYWELL INTERNATIONAL INC.DBA HONEYWELL |
| CL65BL6R8KPE | 56289 | SPRAGUE ELECTRIC COWORLD HQS |
Technical Data | NSN 5910-00-232-1817
| Characteristic | Specifications |
|---|---|
| CAPACITANCE VALUE PER SECTION | 6.800 MICROFARADS SINGLE SECTION |
| TOLERANCE RANGE PER SECTION | -10.00 TO +10.00 PERCENT SINGLE SECTION |
| NONDERATED CONTINUOUS VOLTAGE RATING AND TYPE PER SECTION | 75.0 DC SINGLE SECTION |
| NONDERATED OPERATING TEMP | -55.0 DEG CELSIUS MINIMUM AND 85.0 DEG CELSIUS MAXIMUM |
| BODY STYLE | W/O MTG FACILITIES, AXIAL TERMINALS |
| BODY DIAMETER | 0.219 INCHES MAXIMUM |
| BODY LENGTH | 0.578 INCHES MAXIMUM |
| SCHEMATIC DIAGRAM DESIGNATOR | ELECTRODE(S) GROUNDED TO CASE, W/GND TERMINAL |
| TERMINAL TYPE AND QUANTITY | 2 UNINSULATED WIRE LEAD |
| TERMINAL LENGTH | 1.500 INCHES NOMINAL |
| CASE MATERIAL | METAL |
| CASE INSULATION MATERIAL | PLASTIC |
| CAPACITIVE ELECTRODE MATERIAL | TANTALUM |
| POWER FACTOR AT REFERENCE TEMP IN PERCENT | 4.1000 |
| EQUIVALENT SERIES RESISTANCE AT REFERENCE TEMP IN OHMS | 8.00 |
| DC LEAKAGE AT REFERENCE TEMP | 1.000 MICROAMPERES |
| ELECTRICAL POLARIZATION | POLARIZED |
| RELIABILITY INDICATOR | NOT ESTABLISHED |
| TEST DATA DOCUMENT | 94580-1997201 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |
| TERMINAL SURFACE TREATMENT | SOLDER |
| ANODE TYPE | SOLID |
| IMPEDANCE AT MINIMUM OPERATING TEMP IN OHMS | 300.0 |
| DC LEAKAGE AT MAXIMUM OPERATING TEMP | 2.0 MILLIAMPERES |