NSN 5910-00-334-6454
Part Details | ELECTROLYTIC FIXED CAPACITOR
5910-00-334-6454 A capacitor, whose capacitance value cannot be adjusted or varied, having a chemically formed film as the dielectric. It may be a single unit, or consist of two or more fixed units which cannot be separated.
Alternate Parts: 1778699155, 1778699-155, 109D226X0025C2, 5910-00-334-6454, 00-334-6454, 5910003346454, 003346454
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 59 | JAN 04, 1974 | 00-334-6454 | 00008 ( CAPACITOR, FIXED, ELECTROLYTIC ) |
REFERENCE DRAWINGS & PICTURES
W/O MTG FACILITIES, AXIAL TERMINALS
ELECTRODE(S) GROUNDED TO CASE, W/GND TERMINAL
Cross Reference | NSN 5910-00-334-6454
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| 1778699-155 | 55972 | HONEYWELL INTL INCDEFENSE AVIONICS SYSTEMS |
| 109D226X0025C2 | 56289 | SPRAGUE ELECTRIC COWORLD HQS |
Technical Data | NSN 5910-00-334-6454
| Characteristic | Specifications |
|---|---|
| CAPACITANCE VALUE PER SECTION | 22.000 MICROFARADS SINGLE SECTION |
| TOLERANCE RANGE PER SECTION | -20.00 TO +20.00 PERCENT SINGLE SECTION |
| NONDERATED CONTINUOUS VOLTAGE RATING AND TYPE PER SECTION | 25.0 DC SINGLE SECTION |
| NONDERATED OPERATING TEMP | -55.0 DEG CELSIUS MINIMUM AND 85.0 DEG CELSIUS MAXIMUM |
| BODY STYLE | W/O MTG FACILITIES, AXIAL TERMINALS |
| BODY DIAMETER | 0.203 INCHES NOMINAL |
| BODY LENGTH | 0.516 INCHES NOMINAL |
| SCHEMATIC DIAGRAM DESIGNATOR | ELECTRODE(S) GROUNDED TO CASE, W/GND TERMINAL |
| TERMINAL TYPE AND QUANTITY | 2 UNINSULATED WIRE LEAD |
| TERMINAL LENGTH | 1.500 INCHES MINIMUM |
| CASE MATERIAL | METAL |
| CASE INSULATION MATERIAL | PLASTIC |
| CAPACITIVE ELECTRODE MATERIAL | TANTALUM |
| EQUIVALENT SERIES RESISTANCE AT REFERENCE TEMP IN OHMS | 5.00 |
| DC LEAKAGE AT REFERENCE TEMP | 2.800 MICROAMPERES |
| ELECTRICAL POLARIZATION | POLARIZED |
| RELIABILITY INDICATOR | NOT ESTABLISHED |
| FEATURES PROVIDED | HERMETICALLY SEALED CASE |
| TEST DATA DOCUMENT | 19315-1778699 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |
| TERMINAL SURFACE TREATMENT | SOLDER |
| ANODE TYPE | SOLID |
| IMPEDANCE AT MINIMUM OPERATING TEMP IN OHMS | 140.0 |