NSN 5910-00-782-5004
Part Details | CERAMIC DIELECTRIC FIXED CAPACITOR
5910-00-782-5004 A capacitor, whose capacitance value cannot be adjusted or varied, having a ceramic dielectric. It may be a single unit, or consist of two or more fixed units which cannot be separated.
Alternate Parts: PC517413, PC5174-13, RH06CX152J, 5910-00-782-5004, 00-782-5004, 5910007825004, 007825004
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 59 | FEB 09, 1968 | 00-782-5004 | 00007 ( CAPACITOR, FIXED, CERAMIC DIELECTRIC ) |
REFERENCE DRAWINGS & PICTURES
W/O MTG FACILITIES TERMINAL(S) ON ONE SURFACE
NO COMMON OR GROUNDED ELECTRODE(S)
Cross Reference | NSN 5910-00-782-5004
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| PC5174-13 | 09344 | ROCKWELL COLLINS, INC.DBA RC DISPLAYS SYSTEMS |
| RH06CX152J | 96733 | SFE TECHNOLOGIES |
Technical Data | NSN 5910-00-782-5004
| Characteristic | Specifications |
|---|---|
| CAPACITANCE VALUE PER SECTION | 1500.000 PICOFARADS SINGLE SECTION |
| TOLERANCE RANGE PER SECTION | -5.00 TO +5.00 PERCENT SINGLE SECTION |
| NONDERATED CONTINUOUS VOLTAGE RATING AND TYPE PER SECTION | 200.0 DC SINGLE SECTION |
| TOLERANCE OF TEMP COEFFICIENT PER SECTION IN PPM PER DEG CELSIUS | -15.0 TO +15.0 SINGLE SECTION |
| NONDERATED OPERATING TEMP | -55.0 DEG CELSIUS MINIMUM AND 150.0 DEG CELSIUS MAXIMUM |
| BODY STYLE | W/O MTG FACILITIES TERMINAL(S) ON ONE SURFACE |
| BODY LENGTH | 0.300 INCHES MAXIMUM |
| BODY WIDTH | 0.300 INCHES MAXIMUM |
| BODY HEIGHT | 0.100 INCHES MAXIMUM |
| SCHEMATIC DIAGRAM DESIGNATOR | NO COMMON OR GROUNDED ELECTRODE(S) |
| TERMINAL TYPE AND QUANTITY | 2 UNINSULATED WIRE LEAD |
| TERMINAL LENGTH | 1.250 INCHES MINIMUM |
| CENTER TO CENTER DISTANCE BETWEEN TERMINALS PARALLEL TO LENGTH | 0.185 INCHES MINIMUM AND 0.215 INCHES MAXIMUM |
| CASE MATERIAL | CERAMIC |
| INSULATION RESISTANCE AT REFERENCE TEMP | 10000.0 MEGOHMS |
| POWER FACTOR AT REFERENCE TEMP IN PERCENT | 2.5000 |
| RELIABILITY INDICATOR | NOT ESTABLISHED |
| TEST DATA DOCUMENT | 09344-P5174-13 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |
| TERMINAL SURFACE TREATMENT | SOLDER |