NSN 5910-00-816-9842
Part Details | MICA DIELECTRIC FIXED CAPACITOR
5910-00-816-9842 A capacitor, whose capacitance value cannot be adjusted or varied, having natural sheet mica or reconstituted flaked mica formed into sheets as the dielectric material. It may be a single unit, or consist of two or more fixed units which cannot be separated.
Alternate Parts: MILC57, MIL-C-5/7, CM45B201G01, CM45BK201G03, 5910-00-816-9842, 00-816-9842, 5910008169842, 008169842
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 59 | JAN 01, 1962 | 00-816-9842 | 00005 ( CAPACITOR, FIXED, MICA DIELECTRIC ) |
REFERENCE DRAWINGS & PICTURES
W/MTG HOLE(S)/SLOT(S), TERMINALS ON OPPOSITE SURFACES
NO COMMON OR GROUNDED ELECTRODE(S)
Cross Reference | NSN 5910-00-816-9842
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| MIL-C-5/7 | 81349 | MILITARY SPECIFICATIONSPROMULGATED BY MILITARY |
| CM45B201G01 | 81349 | MILITARY SPECIFICATIONSPROMULGATED BY MILITARY |
| CM45BK201G03 | 81349 | MILITARY SPECIFICATIONSPROMULGATED BY MILITARY |
Technical Data | NSN 5910-00-816-9842
| Characteristic | Specifications |
|---|---|
| CAPACITANCE VALUE PER SECTION | 200.000 PICOFARADS SINGLE SECTION |
| TOLERANCE RANGE PER SECTION | -2.00 TO +2.00 PERCENT SINGLE SECTION |
| NONDERATED CONTINUOUS VOLTAGE RATING AND TYPE PER SECTION | 2500.0 DC SINGLE SECTION |
| NONDERATED OPERATING TEMP | -55.0 DEG CELSIUS MINIMUM AND 125.0 DEG CELSIUS MAXIMUM |
| BODY STYLE | W/MTG HOLE(S)/SLOT(S), TERMINALS ON OPPOSITE SURFACES |
| BODY LENGTH | 1.230 INCHES MINIMUM AND 1.270 INCHES MAXIMUM |
| BODY WIDTH | 1.100 INCHES MINIMUM AND 1.150 INCHES MAXIMUM |
| BODY HEIGHT | 0.310 INCHES MINIMUM AND 0.360 INCHES MAXIMUM |
| SCHEMATIC DIAGRAM DESIGNATOR | NO COMMON OR GROUNDED ELECTRODE(S) |
| TERMINAL TYPE AND QUANTITY | 2 TAB, SOLDER LUG |
| TERMINAL LENGTH | 0.940 INCHES NOMINAL |
| CENTER TO CENTER DISTANCE BETWEEN TERMINALS PARALLEL TO LENGTH | 1.720 INCHES MINIMUM AND 1.780 INCHES MAXIMUM |
| CASE MATERIAL | PLASTIC |
| MOUNTING FACILITY TYPE AND QUANTITY | 2 UNTHREADED MOUNTING HOLES |
| UNTHREADED MOUNTING HOLE DIAMETER | 0.141 INCHES MINIMUM AND 0.147 INCHES MAXIMUM |
| DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY LENGTH | 1.307 INCHES MINIMUM AND 1.317 INCHES MAXIMUM |
| INSULATION RESISTANCE AT REFERENCE TEMP | 10000.0 MEGOHMS |
| DISSIPATION FACTOR AT REFERENCE TEMP IN PERCENT | 0.008 |
| RELIABILITY INDICATOR | NOT ESTABLISHED |
| TEST DATA DOCUMENT | 81349-MIL-C-5 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
| SPECIFICATION/STANDARD DATA | 81349-MIL-C-5 TO 7 GOVERNMENT SPECIFICATION |
| TERMINAL SURFACE TREATMENT | SOLDER |
| INSULATION RESISTANCE AT MAXIMUM OPERATING TEMP | 1500.0 MEGOHMS |