NSN 5910-01-023-9735
Part Details | CERAMIC DIELECTRIC FIXED CAPACITOR
5910-01-023-9735 A capacitor, whose capacitance value cannot be adjusted or varied, having a ceramic dielectric. It may be a single unit, or consist of two or more fixed units which cannot be separated.
Alternate Parts: 8121B227C0G220J, 8121B227C0G0220J, 8121-B227-C0G0-220J, 8111B211COG0220J, 8111-B211COG0-220J, 01603875, 0160-3875, 01603875, 0160-3875, 8111B211COG0220J, 8111-B211COG0-220J, 5910-01-023-9735, 01-023-9735, 5910010239735, 010239735
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 59 | JUL 02, 1976 | 01-023-9735 | 00007 ( CAPACITOR, FIXED, CERAMIC DIELECTRIC ) |
REFERENCE DRAWINGS & PICTURES
W/O MTG FACILITIES TERMINAL(S) ON ONE SURFACE
NO COMMON OR GROUNDED ELECTRODE(S)
Cross Reference | NSN 5910-01-023-9735
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| 8121B227C0G220J | 72982 | ERIE SPECIALTY PRODUCTS INC |
| 8121-B227-C0G0-220J | 72982 | ERIE SPECIALTY PRODUCTS INC |
| 8111-B211COG0-220J | 72982 | ERIE SPECIALTY PRODUCTS INC |
| 0160-3875 | 15770 | FISCHBACH AND MOORE COMMUNICATIONSDIV OF FISCHBACH AND MOORE INC |
| 0160-3875 | 28480 | HEWLETT-PACKARD COMPANYDBA HP |
| 8111-B211COG0-220J | 18796 | MURATA ERIE NORTH AMERICA INCSTATE COLLEGE OPNS |
Technical Data | NSN 5910-01-023-9735
| Characteristic | Specifications |
|---|---|
| CAPACITANCE VALUE PER SECTION | 22.000 PICOFARADS SINGLE SECTION |
| TOLERANCE RANGE PER SECTION | -5.00 TO +5.00 PERCENT SINGLE SECTION |
| NONDERATED CONTINUOUS VOLTAGE RATING AND TYPE PER SECTION | 200.0 DC SINGLE SECTION |
| TEMP COEFFICIENT OF CAPACITANCE PER SECTION IN PPM PER DEG CELSIUS | 0.0 SINGLE SECTION |
| TOLERANCE OF TEMP COEFFICIENT PER SECTION IN PPM PER DEG CELSIUS | -30.0 TO +30.0 SINGLE SECTION |
| NONDERATED OPERATING TEMP | -55.0 DEG CELSIUS MINIMUM AND 125.0 DEG CELSIUS MAXIMUM |
| BODY STYLE | W/O MTG FACILITIES TERMINAL(S) ON ONE SURFACE |
| BODY LENGTH | 0.150 INCHES MAXIMUM |
| BODY WIDTH | 0.150 INCHES MAXIMUM |
| BODY HEIGHT | 0.100 INCHES MAXIMUM |
| SCHEMATIC DIAGRAM DESIGNATOR | NO COMMON OR GROUNDED ELECTRODE(S) |
| TERMINAL TYPE AND QUANTITY | 2 UNINSULATED WIRE LEAD |
| TERMINAL LENGTH | 0.250 INCHES MAXIMUM |
| TERMINAL DIAMETER | 0.016 INCHES NOMINAL |
| CENTER TO CENTER DISTANCE BETWEEN TERMINALS PARALLEL TO LENGTH | 0.100 INCHES NOMINAL |
| CASE MATERIAL | PLASTIC |
| INSULATION RESISTANCE AT REFERENCE TEMP | 100000.0 MEGOHMS |
| DISSIPATION FACTOR AT REFERENCE TEMP IN PERCENT | 0.1000 |
| RELIABILITY INDICATOR | NOT ESTABLISHED |
| TERMINAL SURFACE TREATMENT | SOLDER |