NSN 5910-01-038-7896
Part Details | MICA DIELECTRIC FIXED CAPACITOR
5910-01-038-7896 A capacitor, whose capacitance value cannot be adjusted or varied, having natural sheet mica or reconstituted flaked mica formed into sheets as the dielectric material. It may be a single unit, or consist of two or more fixed units which cannot be separated.
Alternate Parts: DM5FC101J04CR, MILC390015, MIL-C-39001/5, CMR03F101J0CR, CMR03F101J0CP, 10138722, 5910-01-038-7896, 01-038-7896, 5910010387896, 010387896
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 59 | APR 11, 1977 | 01-038-7896 | 00005 ( CAPACITOR, FIXED, MICA DIELECTRIC ) |
REFERENCE DRAWINGS & PICTURES
W/O MTG FACILITIES TERMINAL(S) ON ONE SURFACE
NO COMMON OR GROUNDED ELECTRODE(S)
Cross Reference | NSN 5910-01-038-7896
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| DM5FC101J04CR | 72136 | ELECTRO MOTIVE CORP SUBSIDIARY OFINTERNATIONAL ELECTRONICS CORP |
| MIL-C-39001/5 | 81349 | MILITARY SPECIFICATIONSPROMULGATED BY MILITARY |
| CMR03F101J0CR | 81349 | MILITARY SPECIFICATIONSPROMULGATED BY MILITARY |
| CMR03F101J0CP | 81349 | MILITARY SPECIFICATIONSPROMULGATED BY MILITARY |
| 10138722 | A486G | NIMIKKEISTOKESKUS NCB FINLAND |
Technical Data | NSN 5910-01-038-7896
| Characteristic | Specifications |
|---|---|
| CAPACITANCE VALUE PER SECTION | 100.000 PICOFARADS SINGLE SECTION |
| TOLERANCE RANGE PER SECTION | -5.00 TO +5.00 PERCENT SINGLE SECTION |
| NONDERATED CONTINUOUS VOLTAGE RATING AND TYPE PER SECTION | 300.0 DC SINGLE SECTION |
| TEMP COEFFICIENT OF CAPACITANCE RANGE PER SECTION IN PPM PER DEG CELSIUS | +0.0 TO +70.0 SINGLE SECTION |
| NONDERATED OPERATING TEMP | -55.0 DEG CELSIUS MINIMUM AND 125.0 DEG CELSIUS MAXIMUM |
| BODY STYLE | W/O MTG FACILITIES TERMINAL(S) ON ONE SURFACE |
| BODY LENGTH | 0.270 INCHES MAXIMUM |
| BODY WIDTH | 0.240 INCHES MAXIMUM |
| BODY HEIGHT | 0.180 INCHES MAXIMUM |
| SCHEMATIC DIAGRAM DESIGNATOR | NO COMMON OR GROUNDED ELECTRODE(S) |
| TERMINAL TYPE AND QUANTITY | 2 UNINSULATED WIRE LEAD |
| TERMINAL LENGTH | 1.000 INCHES MINIMUM |
| TERMINAL DIAMETER | 0.016 INCHES NOMINAL |
| CENTER TO CENTER DISTANCE BETWEEN TERMINALS PARALLEL TO LENGTH | 0.120 INCHES NOMINAL |
| CASE MATERIAL | PLASTIC |
| INSULATION RESISTANCE AT REFERENCE TEMP | 100000.0 MEGOHMS |
| RELIABILITY INDICATOR | ESTABLISHED |
| RELIABILITY FAILURE RATE LEVEL IN PERCENT | 0.0100 |
| TEST DATA DOCUMENT | 81349-MIL-C-39001 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
| SPECIFICATION/STANDARD DATA | 81349-MIL-C-0039001 TO 5 GOVERNMENT SPECIFICATION |
| TERMINAL SURFACE TREATMENT | SOLDER |
| INSULATION RESISTANCE AT MAXIMUM OPERATING TEMP | 10000.0 MEGOHMS |