NSN 5910-01-040-8717
Part Details | MICA DIELECTRIC FIXED CAPACITOR
5910-01-040-8717 A capacitor, whose capacitance value cannot be adjusted or varied, having natural sheet mica or reconstituted flaked mica formed into sheets as the dielectric material. It may be a single unit, or consist of two or more fixed units which cannot be separated.
Alternate Parts: 3041485, MILC518, MILC5-18, MILC390015, MILC39001-5, MILPRF390015, MIL-PRF-39001/5, CM08FD333G03, CMR08F333G0DM, CMR08F333GODR, 5910-01-040-8717, 01-040-8717, 5910010408717, 010408717
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 59 | MAY 16, 1977 | 01-040-8717 | 00005 ( CAPACITOR, FIXED, MICA DIELECTRIC ) |
REFERENCE DRAWINGS & PICTURES
W/O MTG FACILITIES TERMINAL(S) ON ONE SURFACE
NO COMMON OR GROUNDED ELECTRODE(S)
Cross Reference | NSN 5910-01-040-8717
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| 3041485 | 21340 | ITT TELECOM PRODUCTS CORPNETWORK SYSTEMS DIV |
| MILC5-18 | 81349 | MILITARY SPECIFICATIONSPROMULGATED BY MILITARY |
| MILC39001-5 | 81349 | MILITARY SPECIFICATIONSPROMULGATED BY MILITARY |
| MIL-PRF-39001/5 | 81349 | MILITARY SPECIFICATIONSPROMULGATED BY MILITARY |
| CM08FD333G03 | 81349 | MILITARY SPECIFICATIONSPROMULGATED BY MILITARY |
| CMR08F333G0DM | 81349 | MILITARY SPECIFICATIONSPROMULGATED BY MILITARY |
| CMR08F333GODR | 81349 | MILITARY SPECIFICATIONSPROMULGATED BY MILITARY |
Technical Data | NSN 5910-01-040-8717
| Characteristic | Specifications |
|---|---|
| CAPACITANCE VALUE PER SECTION | 0.033 MICROFARADS SINGLE SECTION |
| TOLERANCE RANGE PER SECTION | -2.00 TO +2.00 PERCENT SINGLE SECTION |
| NONDERATED CONTINUOUS VOLTAGE RATING AND TYPE PER SECTION | 500.0 DC SINGLE SECTION |
| TEMP COEFFICIENT OF CAPACITANCE RANGE PER SECTION IN PPM PER DEG CELSIUS | +0.0 TO +70.0 SINGLE SECTION |
| NONDERATED OPERATING TEMP | -55.0 DEG CELSIUS MINIMUM AND 125.0 DEG CELSIUS MAXIMUM |
| BODY STYLE | W/O MTG FACILITIES TERMINAL(S) ON ONE SURFACE |
| BODY LENGTH | 1.330 INCHES MINIMUM AND 1.440 INCHES MAXIMUM |
| BODY WIDTH | 1.031 INCHES MAXIMUM |
| BODY HEIGHT | 0.180 INCHES MINIMUM AND 0.890 INCHES MAXIMUM |
| SCHEMATIC DIAGRAM DESIGNATOR | NO COMMON OR GROUNDED ELECTRODE(S) |
| TERMINAL TYPE AND QUANTITY | 2 UNINSULATED WIRE LEAD |
| TERMINAL LENGTH | 1.000 INCHES MINIMUM |
| TERMINAL DIAMETER | 0.040 INCHES NOMINAL |
| CENTER TO CENTER DISTANCE BETWEEN TERMINALS PARALLEL TO LENGTH | 1.050 INCHES NOMINAL |
| CASE MATERIAL | PLASTIC |
| INSULATION RESISTANCE AT REFERENCE TEMP | 1000.0 MEGOHM-MICROFARADS |
| DISSIPATION FACTOR AT REFERENCE TEMP IN PERCENT | 0.0010 |
| RELIABILITY INDICATOR | ESTABLISHED |
| RELIABILITY FAILURE RATE LEVEL IN PERCENT | 0.0100 |
| TEST DATA DOCUMENT | 81349-MIL-C-39001 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
| SPECIFICATION/STANDARD DATA | 81349-MIL-C-39001 TO 5 GOVERNMENT SPECIFICATION |
| TERMINAL SURFACE TREATMENT | SOLDER |
| INSULATION RESISTANCE AT MAXIMUM OPERATING TEMP | 7.5 MEGOHM-MICROFARADS |