NSN 5910-01-051-1425
Part Details | PAPER DIELECTRIC FIXED CAPACITOR
5910-01-051-1425 A capacitor whose capacitance value cannot be adjusted or varied, having paper as the dielectric material. It may be a single unit or consist of two or more fixed units which cannot be seperated. For items whose dielectric material consist of plasticized (plastic impregnated) paper or paper-plastic combinations, see CAPACITOR, FIXED, PLASTIC DIELECTRIC. For items whose electrodes consist of a metallic film deposited (metallized) on the dielectric material, see CAPACITOR, FIXED, METALIZED, PAPER-PLASTIC DIELECTRIC.
Alternate Parts: 61765407, 617654-07, 5910-01-051-1425, 01-051-1425, 5910010511425, 010511425
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 59 | NOV 23, 1977 | 01-051-1425 | 00003 ( CAPACITOR, FIXED, PAPER DIELECTRIC ) |
REFERENCE DRAWINGS & PICTURES
W/MTG TABS/FLANGES, TERMINAL(S) ON ONE SURFACE
SERIES CONNECTED
Cross Reference | NSN 5910-01-051-1425
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| 617654-07 | 99313 | COMMUNICATIONS & POWER INDUSTRIESLLC |
Technical Data | NSN 5910-01-051-1425
| Characteristic | Specifications |
|---|---|
| SECTION QUANTITY | 2 |
| CAPACITANCE VALUE PER SECTION | 300.000 NANOFARADS ALL SECTIONS |
| TOLERANCE RANGE PER SECTION | -10.00 TO +10.00 PERCENT ALL SECTIONS |
| NONDERATED CONTINUOUS VOLTAGE RATING AND TYPE PER SECTION | 5000.0 DC ALL SECTIONS |
| NONDERATED OPERATING TEMP | -55.0 DEG CELSIUS MINIMUM AND 85.0 DEG CELSIUS MAXIMUM |
| BODY STYLE | W/MTG TABS/FLANGES, TERMINAL(S) ON ONE SURFACE |
| BODY LENGTH | 3.750 INCHES NOMINAL |
| BODY WIDTH | 1.250 INCHES NOMINAL |
| BODY HEIGHT | 4.000 INCHES NOMINAL |
| SCHEMATIC DIAGRAM DESIGNATOR | SERIES CONNECTED |
| TERMINAL TYPE AND QUANTITY | 3 STANDOFF, SOLDER LUG |
| TERMINAL HEIGHT FROM BODY | 0.750 INCHES NOMINAL |
| CENTER TO CENTER DISTANCE BETWEEN TERMINALS PARALLEL TO LENGTH | 2.500 INCHES NOMINAL |
| CASE MATERIAL | METAL |
| MOUNTING FACILITY TYPE AND QUANTITY | 2 UNTHREADED MOUNTING HOLES |
| UNTHREADED MOUNTING HOLE DIAMETER | 0.187 INCHES NOMINAL |
| DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY LENGTH | 4.500 INCHES NOMINAL |
| POWER FACTOR AT REFERENCE TEMP IN PERCENT | 0.5000 |
| RELIABILITY INDICATOR | NOT ESTABLISHED |
| TEST DATA DOCUMENT | 99313-617654 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |