NSN 5910-01-067-7324
Part Details | CERAMIC DIELECTRIC FIXED CAPACITOR
5910-01-067-7324 A capacitor, whose capacitance value cannot be adjusted or varied, having a ceramic dielectric. It may be a single unit, or consist of two or more fixed units which cannot be separated.
Alternate Parts: MILC2037, MIL-C-20/37, CC07CG104K, CCR07CG104KM, CCR07CG104JR, CCR07CG104JP, CCR07CG104JM, CCR07CG104GR, 9458317110, 945831-7110, 5910-01-067-7324, 01-067-7324, 5910010677324, 010677324
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 59 | NOV 06, 1978 | 01-067-7324 | 00007 ( CAPACITOR, FIXED, CERAMIC DIELECTRIC ) |
REFERENCE DRAWINGS & PICTURES
W/O MTG FACILITIES TERMINAL(S) ON ONE SURFACE
NO COMMON OR GROUNDED ELECTRODE(S)
Cross Reference | NSN 5910-01-067-7324
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| MIL-C-20/37 | 81349 | MILITARY SPECIFICATIONSPROMULGATED BY MILITARY |
| CC07CG104K | 81349 | MILITARY SPECIFICATIONSPROMULGATED BY MILITARY |
| CCR07CG104KM | 81349 | MILITARY SPECIFICATIONSPROMULGATED BY MILITARY |
| CCR07CG104JR | 81349 | MILITARY SPECIFICATIONSPROMULGATED BY MILITARY |
| CCR07CG104JP | 81349 | MILITARY SPECIFICATIONSPROMULGATED BY MILITARY |
| CCR07CG104JM | 81349 | MILITARY SPECIFICATIONSPROMULGATED BY MILITARY |
| CCR07CG104GR | 81349 | MILITARY SPECIFICATIONSPROMULGATED BY MILITARY |
| 945831-7110 | 06481 | NORTHROP GRUMMAN SYSTEMS CORPORATIONDIV NAVIGATION AND MARITIME SYSTEMS |
Technical Data | NSN 5910-01-067-7324
| Characteristic | Specifications |
|---|---|
| CAPACITANCE VALUE PER SECTION | 0.100 MICROFARADS SINGLE SECTION |
| TOLERANCE RANGE PER SECTION | -2.00 TO +2.00 PERCENT SINGLE SECTION |
| NONDERATED CONTINUOUS VOLTAGE RATING AND TYPE PER SECTION | 50.0 DC SINGLE SECTION |
| TEMP COEFFICIENT OF CAPACITANCE PER SECTION IN PPM PER DEG CELSIUS | 0.0 SINGLE SECTION |
| TOLERANCE OF TEMP COEFFICIENT PER SECTION IN PPM PER DEG CELSIUS | -30.0 TO +30.0 SINGLE SECTION |
| NONDERATED OPERATING TEMP | -55.0 DEG CELSIUS MINIMUM AND 125.0 DEG CELSIUS MAXIMUM |
| BODY STYLE | W/O MTG FACILITIES TERMINAL(S) ON ONE SURFACE |
| BODY LENGTH | 0.480 INCHES NOMINAL |
| BODY WIDTH | 0.480 INCHES NOMINAL |
| BODY HEIGHT | 0.200 INCHES MAXIMUM |
| SCHEMATIC DIAGRAM DESIGNATOR | NO COMMON OR GROUNDED ELECTRODE(S) |
| TERMINAL TYPE AND QUANTITY | 2 UNINSULATED WIRE LEAD |
| TERMINAL LENGTH | 1.250 INCHES MINIMUM |
| TERMINAL DIAMETER | 0.024 INCHES MINIMUM AND 0.029 INCHES MAXIMUM |
| CENTER TO CENTER DISTANCE BETWEEN TERMINALS PARALLEL TO LENGTH | 0.400 INCHES NOMINAL |
| CASE MATERIAL | PLASTIC |
| INSULATION RESISTANCE AT REFERENCE TEMP | 100000.0 MEGOHMS |
| DISSIPATION FACTOR AT REFERENCE TEMP IN PERCENT | 0.1500 |
| RELIABILITY INDICATOR | ESTABLISHED |
| RELIABILITY FAILURE RATE LEVEL IN PERCENT | 0.0100 |
| SPECIAL FEATURES | NUCLEAR HARDNESS CRITICAL ITEM, NO DRAWING TO DETERMINE IF ISC CODE 1 ITEM SHOULD ALSO BE NUCLEAR HARDNESS. CAN'T CHANGE CRITICALITY CODE TO REFLECT NUCLEAR HARDNESS |
| TEST DATA DOCUMENT | 81349-MIL-C-20 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
| SPECIFICATION/STANDARD DATA | 81349-MIL-C-20 TO 37 GOVERNMENT SPECIFICATION |
| TERMINAL SURFACE TREATMENT | SOLDER |
| INSULATION RESISTANCE AT MAXIMUM OPERATING TEMP | 10000.0 MEGOHMS |