NSN 5910-01-087-1183
Part Details | CERAMIC DIELECTRIC FIXED CAPACITOR
5910-01-087-1183 A capacitor, whose capacitance value cannot be adjusted or varied, having a ceramic dielectric. It may be a single unit, or consist of two or more fixed units which cannot be separated.
Alternate Parts: MC101A151J, C114G151J1G2CM, 4007A151J, MILC2027, MIL-C-20/27, CCR75CH151JM, 292CC0G151X5100G2, 5910-01-087-1183, 01-087-1183, 5910010871183, 010871183
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 59 | DEC 12, 1979 | 01-087-1183 | 00007 ( CAPACITOR, FIXED, CERAMIC DIELECTRIC ) |
REFERENCE DRAWINGS & PICTURES
W/O MTG FACILITIES, AXIAL TERMINALS
NO COMMON OR GROUNDED ELECTRODE(S)
Cross Reference | NSN 5910-01-087-1183
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| MC101A151J | 96095 | AVX CORPORATIONDBA OLEAN ADVANCED PRODUCTS |
| C114G151J1G2CM | 31433 | KEMET ELECTRONICS CORPORATIONDBA KEMET |
| 4007A151J | 16546 | MEPCO/CENTRALABA NORTH AMERICAN PHILIPS CO |
| MIL-C-20/27 | 81349 | MILITARY SPECIFICATIONSPROMULGATED BY MILITARY |
| CCR75CH151JM | 81349 | MILITARY SPECIFICATIONSPROMULGATED BY MILITARY |
| 292CC0G151X5100G2 | 56289 | SPRAGUE ELECTRIC COWORLD HQS |
Technical Data | NSN 5910-01-087-1183
| Characteristic | Specifications |
|---|---|
| CAPACITANCE VALUE PER SECTION | 150.000 PICOFARADS SINGLE SECTION |
| TOLERANCE RANGE PER SECTION | -5.00 TO +5.00 PERCENT SINGLE SECTION |
| NONDERATED CONTINUOUS VOLTAGE RATING AND TYPE PER SECTION | 100.0 DC SINGLE SECTION |
| TEMP COEFFICIENT OF CAPACITANCE PER SECTION IN PPM PER DEG CELSIUS | 0.0 SINGLE SECTION |
| TOLERANCE OF TEMP COEFFICIENT PER SECTION IN PPM PER DEG CELSIUS | -30.0 TO +30.0 SINGLE SECTION |
| NONDERATED OPERATING TEMP | -55.0 DEG CELSIUS MINIMUM AND 85.0 DEG CELSIUS MAXIMUM |
| BODY STYLE | W/O MTG FACILITIES, AXIAL TERMINALS |
| BODY DIAMETER | 0.100 INCHES NOMINAL |
| BODY LENGTH | 0.265 INCHES NOMINAL |
| SCHEMATIC DIAGRAM DESIGNATOR | NO COMMON OR GROUNDED ELECTRODE(S) |
| TERMINAL TYPE AND QUANTITY | 2 UNINSULATED WIRE LEAD |
| TERMINAL LENGTH | 1.250 INCHES MINIMUM |
| TERMINAL DIAMETER | 0.020 INCHES NOMINAL |
| CASE MATERIAL | CERAMIC |
| INSULATION RESISTANCE AT REFERENCE TEMP | 100000.0 MEGOHMS |
| DISSIPATION FACTOR AT REFERENCE TEMP IN PERCENT | 0.1000 |
| RELIABILITY INDICATOR | NOT ESTABLISHED |
| TEST DATA DOCUMENT | 81349-MIL-C-20 TO 27 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |