NSN 5910-01-097-7934
Part Details | CERAMIC DIELECTRIC FIXED CAPACITOR
5910-01-097-7934 A capacitor, whose capacitance value cannot be adjusted or varied, having a ceramic dielectric. It may be a single unit, or consist of two or more fixed units which cannot be separated.
Alternate Parts: SMC4474901, SM-C-447490-1, SMC4474901, SM-C-447490-1, 4226962, 422-6962, 805551P2G0390G, 805-551-P2G0-390G, 805551P2G390G, 805-551-P2G-390G, SMC4474901, SM-C-447490-1, 5910-01-097-7934, 01-097-7934, 5910010977934, 010977934
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 59 | JUL 19, 1980 | 01-097-7934 | 00007 ( CAPACITOR, FIXED, CERAMIC DIELECTRIC ) |
REFERENCE DRAWINGS & PICTURES
W/O MTG FACILITIES, RADIAL TERMINALS
NO COMMON OR GROUNDED ELECTRODE(S)
Cross Reference | NSN 5910-01-097-7934
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| SM-C-447490-1 | 05584 | AUTODYNE MANUFACTURING CO., INC. |
| SM-C-447490-1 | 39116 | J A M PLASTICS INC |
| 422-6962 | A486G | NIMIKKEISTOKESKUS NCB FINLAND |
| 805-551-P2G0-390G | 59660 | TUSONIX, INC. |
| 805-551-P2G-390G | 59660 | TUSONIX, INC. |
| SM-C-447490-1 | 80063 | US ARMY COMMUNICATIONS &ELECTRONICS MATERIEL READINESS |
Technical Data | NSN 5910-01-097-7934
| Characteristic | Specifications |
|---|---|
| CAPACITANCE VALUE PER SECTION | 39.000 PICOFARADS SINGLE SECTION |
| TOLERANCE RANGE PER SECTION | -2.00 TO +2.00 PERCENT SINGLE SECTION |
| NONDERATED CONTINUOUS VOLTAGE RATING AND TYPE PER SECTION | 100.0 DC SINGLE SECTION |
| TEMP COEFFICIENT OF CAPACITANCE PER SECTION IN PPM PER DEG CELSIUS | -150.0 SINGLE SECTION |
| TOLERANCE OF TEMP COEFFICIENT PER SECTION IN PPM PER DEG CELSIUS | -30.0 TO +30.0 SINGLE SECTION |
| NONDERATED OPERATING TEMP | -55.0 DEG CELSIUS MINIMUM AND 85.0 DEG CELSIUS MAXIMUM |
| BODY STYLE | W/O MTG FACILITIES, RADIAL TERMINALS |
| BODY DIAMETER | 0.344 INCHES MAXIMUM |
| BODY LENGTH | 0.125 INCHES MAXIMUM |
| SCHEMATIC DIAGRAM DESIGNATOR | NO COMMON OR GROUNDED ELECTRODE(S) |
| TERMINAL TYPE AND QUANTITY | 2 UNINSULATED WIRE LEAD |
| TERMINAL LENGTH | 1.500 INCHES MINIMUM |
| TERMINAL DIAMETER | 0.025 INCHES NOMINAL |
| CENTER TO CENTER DISTANCE BETWEEN TERMINALS PARALLEL TO DIAMETER | 0.250 INCHES NOMINAL |
| CASE MATERIAL | PLASTIC |
| QUALITY FACTOR AT REFERENCE TEMP | 1000.000 |
| RELIABILITY INDICATOR | NOT ESTABLISHED |
| TERMINAL SURFACE TREATMENT | SOLDER |