NSN 5910-01-159-3781
Part Details | ELECTROLYTIC FIXED CAPACITOR
5910-01-159-3781 A capacitor, whose capacitance value cannot be adjusted or varied, having a chemically formed film as the dielectric. It may be a single unit, or consist of two or more fixed units which cannot be separated.
Alternate Parts: 101222U050AA2B, 77C717442P004, 5910-01-159-3781, 01-159-3781, 5910011593781, 011593781
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 59 | AUG 07, 1983 | 01-159-3781 | 00008 ( CAPACITOR, FIXED, ELECTROLYTIC ) |
REFERENCE DRAWINGS & PICTURES
W/O MTG FACILITIES, TERMINAL(S) ON ONE END
NO COMMON OR GROUNDED ELECTRODE(S)
Cross Reference | NSN 5910-01-159-3781
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| 101222U050AA2B | 00853 | CORNELL-DUBILIER MARKETING, INC. |
| 77C717442P004 | 03538 | LOCKHEED MARTIN CORPORATIONDIV RMS |
Technical Data | NSN 5910-01-159-3781
| Characteristic | Specifications |
|---|---|
| CAPACITANCE VALUE PER SECTION | 2200.000 MICROFARADS SINGLE SECTION |
| TOLERANCE RANGE PER SECTION | -10.00 TO +75.00 PERCENT SINGLE SECTION |
| NONDERATED CONTINUOUS VOLTAGE RATING AND TYPE PER SECTION | 50.0 DC SINGLE SECTION |
| NONDERATED OPERATING TEMP | -55.0 DEG CELSIUS MINIMUM AND 105.0 DEG CELSIUS MAXIMUM |
| BODY STYLE | W/O MTG FACILITIES, TERMINAL(S) ON ONE END |
| BODY DIAMETER | 1.375 INCHES NOMINAL |
| BODY LENGTH | 2.125 INCHES NOMINAL |
| SCHEMATIC DIAGRAM DESIGNATOR | NO COMMON OR GROUNDED ELECTRODE(S) |
| TERMINAL TYPE AND QUANTITY | 2 THREADED HOLE |
| TERMINAL DIAMETER | 0.190 INCHES NOMINAL |
| CENTER TO CENTER DISTANCE BETWEEN TERMINALS PARALLEL TO DIAMETER | 0.500 INCHES NOMINAL |
| CASE MATERIAL | METAL |
| CASE INSULATION MATERIAL | PLASTIC |
| CAPACITIVE ELECTRODE MATERIAL | ALUMINUM |
| EQUIVALENT SERIES RESISTANCE AT REFERENCE TEMP IN OHMS | 0.046 |
| DC LEAKAGE AT REFERENCE TEMP | 496.000 MICROAMPERES |
| ELECTRICAL POLARIZATION | POLARIZED |
| RELIABILITY INDICATOR | NOT ESTABLISHED |
| TEST DATA DOCUMENT | 03538-77717442 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |
| TERMINAL SURFACE TREATMENT | SOLDER |
| ANODE TYPE | PLAIN FOIL |
| END ITEM IDENTIFICATION | RADAR SYSTEM TYPE AN/FPS-117 |