NSN 5910-01-223-1544
Part Details | PAPER-PLASTIC DIELECTRIC METALLIZED FIXED CAPACITOR
5910-01-223-1544 A capacitor whose capacitance value cannot be adjusted or varied having paper, plastic, or any combination of paper and plastic as the dielectric material with a metallic film deposited thereon. It may be a single unit or consist of two or more units which cannot be separated.
Alternate Parts: R01D091 ITEM 19, R01D045Z08, F241K4703J330S, F241K-4703J3-30S, F241K4703J030S, F241K-4703J0-30S, M83421011222M, M83421/01-1222M, M83421011221S, M83421/01-1221S, M83421016222P, M83421-01-6222P, MILPRF834211, MIL-PRF-83421/1, 5910-01-223-1544, 01-223-1544, 5910012231544, 012231544
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 59 | DEC 22, 1985 | 01-223-1544 | 31959 ( CAPACITOR, FIXED, METALLIZED, PAPER-PLASTIC DIELECTRIC ) |
REFERENCE DRAWINGS & PICTURES
W/O MTG FACILITIES, AXIAL TERMINALS
NO COMMON OR GROUNDED ELECTRODE(S)
Cross Reference | NSN 5910-01-223-1544
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| R01D091 ITEM 19 | 6Z382 | HUGHES CORPORATIONDBA WESCHLER INSTRUMENTS |
| R01D045Z08 | 6Z382 | HUGHES CORPORATIONDBA WESCHLER INSTRUMENTS |
| F241K-4703J3-30S | 31433 | KEMET ELECTRONICS CORPORATIONDBA KEMET |
| F241K-4703J0-30S | 31433 | KEMET ELECTRONICS CORPORATIONDBA KEMET |
| M83421/01-1222M | 81349 | MILITARY SPECIFICATIONSPROMULGATED BY MILITARY |
| M83421/01-1221S | 81349 | MILITARY SPECIFICATIONSPROMULGATED BY MILITARY |
| M83421-01-6222P | 81349 | MILITARY SPECIFICATIONSPROMULGATED BY MILITARY |
| MIL-PRF-83421/1 | 81349 | MILITARY SPECIFICATIONSPROMULGATED BY MILITARY |
Technical Data | NSN 5910-01-223-1544
| Characteristic | Specifications |
|---|---|
| CAPACITANCE VALUE PER SECTION | 0.470 MICROFARADS SINGLE SECTION |
| TOLERANCE RANGE PER SECTION | -5.00 TO +5.00 PERCENT SINGLE SECTION |
| NONDERATED CONTINUOUS VOLTAGE RATING AND TYPE PER SECTION | 30.0 DC SINGLE SECTION |
| NONDERATED OPERATING TEMP | -65.0 DEG CELSIUS MINIMUM AND 100.0 DEG CELSIUS MAXIMUM |
| BODY STYLE | W/O MTG FACILITIES, AXIAL TERMINALS |
| BODY DIAMETER | 0.312 INCHES MINIMUM AND 0.342 INCHES MAXIMUM |
| BODY LENGTH | 0.657 INCHES MINIMUM AND 0.717 INCHES MAXIMUM |
| SCHEMATIC DIAGRAM DESIGNATOR | NO COMMON OR GROUNDED ELECTRODE(S) |
| TERMINAL TYPE AND QUANTITY | 2 UNINSULATED WIRE LEAD |
| TERMINAL LENGTH | 1.625 INCHES MINIMUM |
| TERMINAL DIAMETER | 0.025 INCHES NOMINAL |
| CASE MATERIAL | METAL |
| CASE INSULATION MATERIAL | PLASTIC |
| INSULATION RESISTANCE AT REFERENCE TEMP | 3000000.0 MEGOHMS |
| DISSIPATION FACTOR AT REFERENCE TEMP IN PERCENT | 0.1500 |
| RELIABILITY INDICATOR | ESTABLISHED |
| RELIABILITY FAILURE RATE LEVEL IN PERCENT | 0.0010 |
| FEATURES PROVIDED | HERMETICALLY SEALED CASE |
| TEST DATA DOCUMENT | 81349-MIL-C-83421 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
| SPECIFICATION/STANDARD DATA | 81349-MIL-C-83421 TO 1 GOVERNMENT SPECIFICATION |
| TERMINAL SURFACE TREATMENT | SOLDER |
| INSULATION RESISTANCE AT MAXIMUM OPERATING TEMP | 300000.0 MEGOHMS |