NSN 5910-01-225-1282
Part Details | CERAMIC DIELECTRIC FIXED CAPACITOR
5910-01-225-1282 A capacitor, whose capacitance value cannot be adjusted or varied, having a ceramic dielectric. It may be a single unit, or consist of two or more fixed units which cannot be separated.
Alternate Parts: A30128087, A3012808-7, A30128087, A3012808-7, A30128087, A3012808-7, A30128087, A3012808-7, A30128087, A3012808-7, A30128087, A3012808-7, 5910-01-225-1282, 01-225-1282, 5910012251282, 012251282
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 59 | JAN 29, 1986 | 01-225-1282 | 00007 ( CAPACITOR, FIXED, CERAMIC DIELECTRIC ) |
REFERENCE DRAWINGS & PICTURES
W/O MTG FACILITIES TERMINAL(S) ON ONE SURFACE
NO COMMON OR GROUNDED ELECTRODE(S)
Cross Reference | NSN 5910-01-225-1282
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| A3012808-7 | 04222 | AVX CORPORATIONDBA OLEAN ADVANCED PRODUCTS |
| A3012808-7 | 51642 | CENTRE CAPACITOR INC |
| A3012808-7 | 31433 | KEMET ELECTRONICS CORPORATIONDBA KEMET |
| A3012808-7 | 96733 | SFE TECHNOLOGIES |
| A3012808-7 | 59660 | TUSONIX, INC. |
| A3012808-7 | 80063 | US ARMY COMMUNICATIONS &ELECTRONICS MATERIEL READINESS |
Technical Data | NSN 5910-01-225-1282
| Characteristic | Specifications |
|---|---|
| CAPACITANCE VALUE PER SECTION | 2.200 PICOFARADS SINGLE SECTION |
| TOLERANCE RANGE PER SECTION | -0.10 TO +0.10 PICOFARADS SINGLE SECTION |
| NONDERATED CONTINUOUS VOLTAGE RATING AND TYPE PER SECTION | 100.0 DC SINGLE SECTION |
| TEMP COEFFICIENT OF CAPACITANCE PER SECTION IN PPM PER DEG CELSIUS | 0.0 SINGLE SECTION |
| TOLERANCE OF TEMP COEFFICIENT PER SECTION IN PPM PER DEG CELSIUS | -30.0 TO +30.0 SINGLE SECTION |
| NONDERATED OPERATING TEMP | -55.0 DEG CELSIUS MINIMUM AND 125.0 DEG CELSIUS MAXIMUM |
| BODY STYLE | W/O MTG FACILITIES TERMINAL(S) ON ONE SURFACE |
| BODY LENGTH | 0.100 INCHES MAXIMUM |
| BODY WIDTH | 0.100 INCHES MAXIMUM |
| BODY HEIGHT | 0.070 INCHES MAXIMUM |
| SCHEMATIC DIAGRAM DESIGNATOR | NO COMMON OR GROUNDED ELECTRODE(S) |
| TERMINAL TYPE AND QUANTITY | 2 UNINSULATED WIRE LEAD |
| TERMINAL LENGTH | 1.250 INCHES MINIMUM |
| TERMINAL DIAMETER | 0.016 INCHES NOMINAL |
| CENTER TO CENTER DISTANCE BETWEEN TERMINALS PARALLEL TO LENGTH | 0.100 INCHES NOMINAL |
| CASE MATERIAL | PLASTIC |
| INSULATION RESISTANCE AT REFERENCE TEMP | 100000.0 MEGOHMS |
| QUALITY FACTOR AT REFERENCE TEMP | 1000.0000 |
| RELIABILITY INDICATOR | NOT ESTABLISHED |
| TERMINAL SURFACE TREATMENT | SOLDER |
| INSULATION RESISTANCE AT MAXIMUM OPERATING TEMP | 10000.0 MEGOHMS |