NSN 5910-01-238-6319
Part Details | CERAMIC DIELECTRIC FIXED CAPACITOR
5910-01-238-6319 A capacitor, whose capacitance value cannot be adjusted or varied, having a ceramic dielectric. It may be a single unit, or consist of two or more fixed units which cannot be separated.
Alternate Parts: MILC556815, MIL-C-55681/5, CY89D180G, CDR25BG180EJSM, CDR25BG180EGSM, CDR25BG180EFSR, CDR25BG180EFSM, UY22180G, 5910-01-238-6319, 01-238-6319, 5910012386319, 012386319
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 59 | AUG 19, 1986 | 01-238-6319 | 00007 ( CAPACITOR, FIXED, CERAMIC DIELECTRIC ) |
REFERENCE DRAWINGS & PICTURES
W/O MTG FACILITIES, TERMINALS ON OPPOSITE SURFACES
NO COMMON OR GROUNDED ELECTRODE(S)
Cross Reference | NSN 5910-01-238-6319
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| MIL-C-55681/5 | 81349 | MILITARY SPECIFICATIONSPROMULGATED BY MILITARY |
| CY89D180G | 81349 | MILITARY SPECIFICATIONSPROMULGATED BY MILITARY |
| CDR25BG180EJSM | 81349 | MILITARY SPECIFICATIONSPROMULGATED BY MILITARY |
| CDR25BG180EGSM | 81349 | MILITARY SPECIFICATIONSPROMULGATED BY MILITARY |
| CDR25BG180EFSR | 81349 | MILITARY SPECIFICATIONSPROMULGATED BY MILITARY |
| CDR25BG180EFSM | 81349 | MILITARY SPECIFICATIONSPROMULGATED BY MILITARY |
| UY22180G | 51406 | MURATA ERIE NORTH AMERICA INCHEADQUARTERS AND GEORGIA OPNS |
Technical Data | NSN 5910-01-238-6319
| Characteristic | Specifications |
|---|---|
| CAPACITANCE VALUE PER SECTION | 18.000 PICOFARADS SINGLE SECTION |
| TOLERANCE RANGE PER SECTION | -1.00 TO +1.00 PERCENT SINGLE SECTION |
| NONDERATED CONTINUOUS VOLTAGE RATING AND TYPE PER SECTION | 500.0 DC SINGLE SECTION |
| TEMP COEFFICIENT OF CAPACITANCE PER SECTION IN PPM PER DEG CELSIUS | 90.0 SINGLE SECTION |
| TOLERANCE OF TEMP COEFFICIENT PER SECTION IN PPM PER DEG CELSIUS | -20.0 TO +20.0 SINGLE SECTION |
| NONDERATED OPERATING TEMP | -55.0 DEG CELSIUS MINIMUM AND 125.0 DEG CELSIUS MAXIMUM |
| BODY STYLE | W/O MTG FACILITIES, TERMINALS ON OPPOSITE SURFACES |
| BODY LENGTH | 0.120 INCHES MINIMUM AND 0.150 INCHES MAXIMUM |
| BODY WIDTH | 0.030 INCHES MINIMUM AND 0.100 INCHES MAXIMUM |
| BODY HEIGHT | 0.095 INCHES MINIMUM AND 0.125 INCHES MAXIMUM |
| SCHEMATIC DIAGRAM DESIGNATOR | NO COMMON OR GROUNDED ELECTRODE(S) |
| TERMINAL TYPE AND QUANTITY | 2 UNINSULATED WIRE LEAD |
| TERMINAL LENGTH | 0.500 INCHES MINIMUM |
| TERMINAL DIAMETER | 0.016 INCHES NOMINAL |
| CASE MATERIAL | 0$DGSA000 |
| INSULATION RESISTANCE AT REFERENCE TEMP | 1000000.0 MEGOHMS |
| DISSIPATION FACTOR AT REFERENCE TEMP IN PERCENT | 0.050 |
| QUALITY FACTOR AT REFERENCE TEMP | 10000.000 |
| RELIABILITY INDICATOR | ESTABLISHED |
| RELIABILITY FAILURE RATE LEVEL IN PERCENT | 0.010 |
| TEST DATA DOCUMENT | 81349-MIL-C-55681 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
| SPECIFICATION/STANDARD DATA | 81349-MIL-C-55681 TO 5 GOVERNMENT SPECIFICATION |
| TERMINAL SURFACE TREATMENT | SOLDER |
| INSULATION RESISTANCE AT MAXIMUM OPERATING TEMP | 100000.0 MEGOHMS |