NSN 5910-01-238-6693
Part Details | CERAMIC DIELECTRIC FIXED CAPACITOR
5910-01-238-6693 A capacitor, whose capacitance value cannot be adjusted or varied, having a ceramic dielectric. It may be a single unit, or consist of two or more fixed units which cannot be separated.
Alternate Parts: 3419100A821K, 3419-100A-821K, 200100NP0821G, 200-100-NP0-821G, 8121100COG821, 8121-100-COG-821, 8121100C0G821G, 8121-100-C0G-821G, 01604030, 0160-4030, MILPRF2035, MIL-PRF-20/35, MILC2035, MIL-C-20/35, CCR09CG821GS, CCR09CG821GR, RPE121C0G821G100V, CCR09CG821GS, 8121100C0G821G, 8121-100-C0G-821G, 5910-01-238-6693, 01-238-6693, 5910012386693, 012386693
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 59 | AUG 19, 1986 | 01-238-6693 | 00007 ( CAPACITOR, FIXED, CERAMIC DIELECTRIC ) |
REFERENCE DRAWINGS & PICTURES
W/O MTG FACILITIES TERMINAL(S) ON ONE SURFACE
NO COMMON OR GROUNDED ELECTRODE(S)
Cross Reference | NSN 5910-01-238-6693
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| 3419-100A-821K | 04222 | AVX CORPORATIONDBA OLEAN ADVANCED PRODUCTS |
| 200-100-NP0-821G | 51642 | CENTRE CAPACITOR INC |
| 8121-100-COG-821 | 72982 | ERIE SPECIALTY PRODUCTS INC |
| 8121-100-C0G-821G | 72982 | ERIE SPECIALTY PRODUCTS INC |
| 0160-4030 | 28480 | HEWLETT-PACKARD COMPANYDBA HP |
| MIL-PRF-20/35 | 81349 | MILITARY SPECIFICATIONSPROMULGATED BY MILITARY |
| MIL-C-20/35 | 81349 | MILITARY SPECIFICATIONSPROMULGATED BY MILITARY |
| CCR09CG821GS | 81349 | MILITARY SPECIFICATIONSPROMULGATED BY MILITARY |
| CCR09CG821GR | 81349 | MILITARY SPECIFICATIONSPROMULGATED BY MILITARY |
| RPE121C0G821G100V | 18796 | MURATA ERIE NORTH AMERICA INCSTATE COLLEGE OPNS |
| CCR09CG821GS | 83421 | NATIONAL INDUSTRIES FOR THE BLIND |
| 8121-100-C0G-821G | 59660 | TUSONIX, INC. |
Technical Data | NSN 5910-01-238-6693
| Characteristic | Specifications |
|---|---|
| CAPACITANCE VALUE PER SECTION | 820.000 PICOFARADS SINGLE SECTION |
| TOLERANCE RANGE PER SECTION | -2.00 TO +2.00 PERCENT SINGLE SECTION |
| NONDERATED CONTINUOUS VOLTAGE RATING AND TYPE PER SECTION | 100.0 DC SINGLE SECTION |
| TEMP COEFFICIENT OF CAPACITANCE PER SECTION IN PPM PER DEG CELSIUS | 0.0 SINGLE SECTION |
| TOLERANCE OF TEMP COEFFICIENT PER SECTION IN PPM PER DEG CELSIUS | -30.0 TO +30.0 SINGLE SECTION |
| NONDERATED OPERATING TEMP | -55.0 DEG CELSIUS MINIMUM AND 125.0 DEG CELSIUS MAXIMUM |
| BODY STYLE | W/O MTG FACILITIES TERMINAL(S) ON ONE SURFACE |
| BODY LENGTH | 0.190 INCHES NOMINAL |
| BODY WIDTH | 0.190 INCHES NOMINAL |
| BODY HEIGHT | 0.090 INCHES NOMINAL |
| SCHEMATIC DIAGRAM DESIGNATOR | NO COMMON OR GROUNDED ELECTRODE(S) |
| TERMINAL TYPE AND QUANTITY | 2 UNINSULATED WIRE LEAD |
| TERMINAL LENGTH | 1.250 INCHES MINIMUM |
| TERMINAL DIAMETER | 0.020 INCHES MINIMUM AND 0.027 INCHES MAXIMUM |
| CENTER TO CENTER DISTANCE BETWEEN TERMINALS PARALLEL TO LENGTH | 0.100 INCHES NOMINAL |
| CASE MATERIAL | PLASTIC |
| INSULATION RESISTANCE AT REFERENCE TEMP | 100000.0 MEGOHMS |
| DISSIPATION FACTOR AT REFERENCE TEMP IN PERCENT | 0.150 |
| RELIABILITY INDICATOR | ESTABLISHED |
| RELIABILITY FAILURE RATE LEVEL IN PERCENT | 0.0010 |
| TEST DATA DOCUMENT | 81349-MIL-C-20 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
| SPECIFICATION/STANDARD DATA | 81349-MIL-C-20 TO 35 GOVERNMENT SPECIFICATION |
| TERMINAL SURFACE TREATMENT | SOLDER |
| INSULATION RESISTANCE AT MAXIMUM OPERATING TEMP | 10000.0 MEGOHMS |