NSN 5910-01-263-4963
Part Details | ELECTROLYTIC FIXED CAPACITOR
5910-01-263-4963 A capacitor, whose capacitance value cannot be adjusted or varied, having a chemically formed film as the dielectric. It may be a single unit, or consist of two or more fixed units which cannot be separated.
Alternate Parts: MILC553654, MIL-C-55365/4, CWR06JB474KM, 5910-01-263-4963, 01-263-4963, 5910012634963, 012634963
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 59 | SEP 15, 1987 | 01-263-4963 | 00008 ( CAPACITOR, FIXED, ELECTROLYTIC ) |
REFERENCE DRAWINGS & PICTURES
CHIP TYPE
NO COMMON OR GROUNDED ELECTRODE(S)
Cross Reference | NSN 5910-01-263-4963
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| MIL-C-55365/4 | 81349 | MILITARY SPECIFICATIONSPROMULGATED BY MILITARY |
| CWR06JB474KM | 81349 | MILITARY SPECIFICATIONSPROMULGATED BY MILITARY |
Technical Data | NSN 5910-01-263-4963
| Characteristic | Specifications |
|---|---|
| CAPACITANCE VALUE PER SECTION | 0.470 MICROFARADS SINGLE SECTION |
| TOLERANCE RANGE PER SECTION | -10.00 TO +10.00 PERCENT SINGLE SECTION |
| NONDERATED CONTINUOUS VOLTAGE RATING AND TYPE PER SECTION | 20.0 DC SINGLE SECTION |
| NONDERATED OPERATING TEMP | -55.0 DEG CELSIUS MINIMUM AND 125.0 DEG CELSIUS MAXIMUM |
| BODY STYLE | CHIP TYPE |
| BODY LENGTH | 0.085 INCHES MINIMUM AND 0.115 INCHES MAXIMUM |
| BODY WIDTH | 0.035 INCHES MINIMUM AND 0.065 INCHES MAXIMUM |
| BODY HEIGHT | 0.035 INCHES MINIMUM AND 0.065 INCHES MAXIMUM |
| SCHEMATIC DIAGRAM DESIGNATOR | NO COMMON OR GROUNDED ELECTRODE(S) |
| TERMINAL TYPE AND QUANTITY | 2 BONDING PAD |
| TERMINAL LENGTH | 0.025 INCHES MINIMUM AND 0.035 INCHES MAXIMUM |
| CASE MATERIAL | PLASTIC |
| CAPACITIVE ELECTRODE MATERIAL | TANTALUM |
| DISSIPATION FACTOR AT REFERENCE TEMP IN PERCENT | 6.0000 |
| DC LEAKAGE AT REFERENCE TEMP | 1.000 MICROAMPERES |
| ELECTRICAL POLARIZATION | NONPOLARIZED |
| RELIABILITY INDICATOR | ESTABLISHED |
| RELIABILITY FAILURE RATE LEVEL IN PERCENT | 1.0000 |
| TEST DATA DOCUMENT | 81349-MIL-C-55365 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
| SPECIFICATION/STANDARD DATA | 81349-MIL-C-55365 TO 4 GOVERNMENT SPECIFICATION |
| TERMINAL SURFACE TREATMENT | GOLD |
| ANODE TYPE | SOLID |
| DC LEAKAGE AT MAXIMUM OPERATING TEMP | 12.0 MICROAMPERES |
| PRECIOUS MATERIAL AND LOCATION | TERMINALS GOLD |