NSN 5910-01-300-8928
Part Details | CERAMIC DIELECTRIC FIXED CAPACITOR
5910-01-300-8928 A capacitor, whose capacitance value cannot be adjusted or varied, having a ceramic dielectric. It may be a single unit, or consist of two or more fixed units which cannot be separated.
Alternate Parts: SR151A151KAT, SR151A151KAA, SR151A151JAA, CCR09CG151GR, 01604764, 0160-4764, 5018EO100RD151G, MILPRF2035, MIL-PRF-20/35, MILC2035, MIL-C-20/35, CC09CG151J, CC09CG151G, CCR09CG151M, CCR09CG151GS, CCR09CG151GR, 10128286, B37979G0151K100, A308871728, A3088717-28, 5910-01-300-8928, 01-300-8928, 5910013008928, 013008928
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 59 | MAY 20, 1989 | 01-300-8928 | 00007 ( CAPACITOR, FIXED, CERAMIC DIELECTRIC ) |
REFERENCE DRAWINGS & PICTURES
W/O MTG FACILITIES TERMINAL(S) ON ONE SURFACE
NO COMMON OR GROUNDED ELECTRODE(S)
Cross Reference | NSN 5910-01-300-8928
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| SR151A151KAT | 04222 | AVX CORPORATIONDBA OLEAN ADVANCED PRODUCTS |
| SR151A151KAA | 04222 | AVX CORPORATIONDBA OLEAN ADVANCED PRODUCTS |
| SR151A151JAA | 04222 | AVX CORPORATIONDBA OLEAN ADVANCED PRODUCTS |
| CCR09CG151GR | 18349 | BIONEX MEDICAL INDUSTRIES |
| 0160-4764 | 28480 | HEWLETT-PACKARD COMPANYDBA HP |
| 5018EO100RD151G | 20932 | ILLINOIS TOOL WORKS INCEMCON DIV |
| MIL-PRF-20/35 | 81349 | MILITARY SPECIFICATIONSPROMULGATED BY MILITARY |
| MIL-C-20/35 | 81349 | MILITARY SPECIFICATIONSPROMULGATED BY MILITARY |
| CC09CG151J | 81349 | MILITARY SPECIFICATIONSPROMULGATED BY MILITARY |
| CC09CG151G | 81349 | MILITARY SPECIFICATIONSPROMULGATED BY MILITARY |
| CCR09CG151M | 81349 | MILITARY SPECIFICATIONSPROMULGATED BY MILITARY |
| CCR09CG151GS | 81349 | MILITARY SPECIFICATIONSPROMULGATED BY MILITARY |
| CCR09CG151GR | 81349 | MILITARY SPECIFICATIONSPROMULGATED BY MILITARY |
| 10128286 | A486G | NIMIKKEISTOKESKUS NCB FINLAND |
| B37979G0151K100 | 25088 | SIEMENS CORP |
| A3088717-28 | 80063 | US ARMY COMMUNICATIONS &ELECTRONICS MATERIEL READINESS |
Technical Data | NSN 5910-01-300-8928
| Characteristic | Specifications |
|---|---|
| CAPACITANCE VALUE PER SECTION | 150.000 PICOFARADS SINGLE SECTION |
| TOLERANCE RANGE PER SECTION | -2.00 TO +2.00 PERCENT SINGLE SECTION |
| NONDERATED CONTINUOUS VOLTAGE RATING AND TYPE PER SECTION | 200.0 DC SINGLE SECTION |
| TEMP COEFFICIENT OF CAPACITANCE PER SECTION IN PPM PER DEG CELSIUS | 0.0 SINGLE SECTION |
| TOLERANCE OF TEMP COEFFICIENT PER SECTION IN PPM PER DEG CELSIUS | -30.0 TO +30.0 SINGLE SECTION |
| NONDERATED OPERATING TEMP | -55.0 DEG CELSIUS MINIMUM AND 125.0 DEG CELSIUS MAXIMUM |
| BODY STYLE | W/O MTG FACILITIES TERMINAL(S) ON ONE SURFACE |
| BODY LENGTH | 0.180 INCHES MINIMUM AND 0.200 INCHES MAXIMUM |
| BODY WIDTH | 0.180 INCHES MINIMUM AND 0.200 INCHES MAXIMUM |
| BODY HEIGHT | 0.080 INCHES MINIMUM AND 0.100 INCHES MAXIMUM |
| SCHEMATIC DIAGRAM DESIGNATOR | NO COMMON OR GROUNDED ELECTRODE(S) |
| TERMINAL TYPE AND QUANTITY | 2 UNINSULATED WIRE LEAD |
| TERMINAL LENGTH | 1.250 INCHES MINIMUM |
| TERMINAL DIAMETER | 0.025 INCHES NOMINAL |
| CENTER TO CENTER DISTANCE BETWEEN TERMINALS PARALLEL TO LENGTH | 0.085 INCHES MINIMUM AND 0.115 INCHES MAXIMUM |
| CASE MATERIAL | PLASTIC |
| INSULATION RESISTANCE AT REFERENCE TEMP | 100000.0 MEGOHMS |
| DISSIPATION FACTOR AT REFERENCE TEMP IN PERCENT | 0.150 |
| RELIABILITY INDICATOR | ESTABLISHED |
| RELIABILITY FAILURE RATE LEVEL IN PERCENT | 0.001 |
| TEST DATA DOCUMENT | 81349-MIL-C-20 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
| SPECIFICATION/STANDARD DATA | 81349-MIL-C-20 TO 35 GOVERNMENT SPECIFICATION |
| TERMINAL SURFACE TREATMENT | SOLDER |
| INSULATION RESISTANCE AT MAXIMUM OPERATING TEMP | 10000.0 MEGOHMS |