NSN 5910-01-333-3252
Part Details | CERAMIC DIELECTRIC FIXED CAPACITOR
5910-01-333-3252 A capacitor, whose capacitance value cannot be adjusted or varied, having a ceramic dielectric. It may be a single unit, or consist of two or more fixed units which cannot be separated.
Alternate Parts: 8712039, 87120-39, 8712039, 87120-39, 10135144, 8712039, 87120-39, 12494939, 124949-39, 5910-01-333-3252, 01-333-3252, 5910013333252, 013333252
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 59 | JAN 31, 1991 | 01-333-3252 | 00007 ( CAPACITOR, FIXED, CERAMIC DIELECTRIC ) |
REFERENCE DRAWINGS & PICTURES
SINGLE INLINE
SERIES CONNECTED, END TERMINAL GROUNDED TO CASE
Cross Reference | NSN 5910-01-333-3252
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| 87120-39 | 037Z3 | DLA LAND AND MARITIMEDBA ENGINEERING AND TECHNICAL |
| 87120-39 | 58421 | GREATBATCH SIERRA INC |
| 10135144 | A486G | NIMIKKEISTOKESKUS NCB FINLAND |
| 87120-39 | 93958 | REPUBLIC ELECTRONICS CORP S INC |
| 124949-39 | 93958 | REPUBLIC ELECTRONICS CORP S INC |
Technical Data | NSN 5910-01-333-3252
| Characteristic | Specifications |
|---|---|
| SECTION QUANTITY | 8 |
| CAPACITANCE VALUE PER SECTION | 390.000 PICOFARADS ALL SECTIONS |
| TOLERANCE RANGE PER SECTION | -5.00 TO +5.00 PERCENT ALL SECTIONS |
| NONDERATED CONTINUOUS VOLTAGE RATING AND TYPE PER SECTION | 100.0 DC ALL SECTIONS |
| TEMP COEFFICIENT OF CAPACITANCE PER SECTION IN PPM PER DEG CELSIUS | 0.0 ALL SECTIONS |
| TOLERANCE OF TEMP COEFFICIENT PER SECTION IN PPM PER DEG CELSIUS | -30.0 TO +30.0 ALL SECTIONS |
| NONDERATED OPERATING TEMP | -55.0 DEG CELSIUS MINIMUM AND 125.0 DEG CELSIUS MAXIMUM |
| BODY STYLE | SINGLE INLINE |
| BODY LENGTH | 1.000 INCHES MAXIMUM |
| BODY WIDTH | 0.135 INCHES MAXIMUM |
| BODY HEIGHT | 0.300 INCHES MAXIMUM |
| SCHEMATIC DIAGRAM DESIGNATOR | SERIES CONNECTED, END TERMINAL GROUNDED TO CASE |
| TERMINAL TYPE AND QUANTITY | 10 PIN |
| TERMINAL LENGTH | 0.115 INCHES MINIMUM |
| TERMINAL DIAMETER | 0.016 INCHES MINIMUM AND 0.020 INCHES MAXIMUM |
| CENTER TO CENTER DISTANCE BETWEEN TERMINALS PARALLEL TO LENGTH | 0.890 INCHES MINIMUM AND 0.910 INCHES MAXIMUM |
| CASE MATERIAL | PLASTIC |
| INSULATION RESISTANCE AT REFERENCE TEMP | 100000.0 MEGOHMS |
| DISSIPATION FACTOR AT REFERENCE TEMP IN PERCENT | 0.100 |
| POWER FACTOR AT REFERENCE TEMP IN PERCENT | 1000.000 |
| RELIABILITY INDICATOR | NOT ESTABLISHED |
| TEST DATA DOCUMENT | 14933-87120-39 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |
| TERMINAL SURFACE TREATMENT | SOLDER |