NSN 5910-01-335-1636
Part Details | CERAMIC DIELECTRIC FIXED CAPACITOR
5910-01-335-1636 A capacitor, whose capacitance value cannot be adjusted or varied, having a ceramic dielectric. It may be a single unit, or consist of two or more fixed units which cannot be separated.
Alternate Parts: SR151A8R2CAA, 876164, MILC2047, MIL-C-20/47, CCR13CH8R2CR, RPE121A8R2C1, 5910-01-335-1636, 01-335-1636, 5910013351636, 013351636
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 59 | MAR 06, 1991 | 01-335-1636 | 00007 ( CAPACITOR, FIXED, CERAMIC DIELECTRIC ) |
REFERENCE DRAWINGS & PICTURES
W/O MTG FACILITIES TERMINAL(S) ON ONE SURFACE
NO COMMON OR GROUNDED ELECTRODE(S)
Cross Reference | NSN 5910-01-335-1636
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| SR151A8R2CAA | 04222 | AVX CORPORATIONDBA OLEAN ADVANCED PRODUCTS |
| 876164 | 89536 | FLUKE CORPORATION |
| MIL-C-20/47 | 81349 | MILITARY SPECIFICATIONSPROMULGATED BY MILITARY |
| CCR13CH8R2CR | 81349 | MILITARY SPECIFICATIONSPROMULGATED BY MILITARY |
| RPE121A8R2C1 | 51406 | MURATA ERIE NORTH AMERICA INCHEADQUARTERS AND GEORGIA OPNS |
Technical Data | NSN 5910-01-335-1636
| Characteristic | Specifications |
|---|---|
| CAPACITANCE VALUE PER SECTION | 8.200 PICOFARADS SINGLE SECTION |
| TOLERANCE RANGE PER SECTION | -0.25 TO +0.25 PICOFARADS SINGLE SECTION |
| NONDERATED CONTINUOUS VOLTAGE RATING AND TYPE PER SECTION | 100.0 DC SINGLE SECTION |
| TEMP COEFFICIENT OF CAPACITANCE PER SECTION IN PPM PER DEG CELSIUS | 0.0 SINGLE SECTION |
| TOLERANCE OF TEMP COEFFICIENT PER SECTION IN PPM PER DEG CELSIUS | -60.0 TO +60.0 SINGLE SECTION |
| NONDERATED OPERATING TEMP | -55.0 DEG CELSIUS MINIMUM AND 125.0 DEG CELSIUS MAXIMUM |
| BODY STYLE | W/O MTG FACILITIES TERMINAL(S) ON ONE SURFACE |
| BODY LENGTH | 0.110 INCHES MAXIMUM |
| BODY WIDTH | 0.100 INCHES MAXIMUM |
| BODY HEIGHT | 0.100 INCHES MAXIMUM |
| SCHEMATIC DIAGRAM DESIGNATOR | NO COMMON OR GROUNDED ELECTRODE(S) |
| TERMINAL TYPE AND QUANTITY | 2 UNINSULATED WIRE LEAD |
| TERMINAL LENGTH | 1.250 INCHES MINIMUM |
| TERMINAL DIAMETER | 0.014 INCHES MINIMUM AND 0.018 INCHES MAXIMUM |
| CENTER TO CENTER DISTANCE BETWEEN TERMINALS PARALLEL TO LENGTH | 0.085 INCHES MINIMUM AND 0.115 INCHES MAXIMUM |
| CASE MATERIAL | PLASTIC |
| INSULATION RESISTANCE AT REFERENCE TEMP | 100000.0 MEGOHMS |
| DISSIPATION FACTOR AT REFERENCE TEMP IN PERCENT | 0.150 |
| RELIABILITY INDICATOR | ESTABLISHED |
| RELIABILITY FAILURE RATE LEVEL IN PERCENT | 0.010 |
| TEST DATA DOCUMENT | 81349-MIL-C-20 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
| SPECIFICATION/STANDARD DATA | 81349-MIL-C-20 TO 47 GOVERNMENT SPECIFICATION |
| TERMINAL SURFACE TREATMENT | SOLDER |
| END ITEM IDENTIFICATION | 5865-01-188-3309 JAMMER SYSTEM RESPO |
| INSULATION RESISTANCE AT MAXIMUM OPERATING TEMP | 10000.0 MEGOHMS |