NSN 5910-01-389-3761
Part Details | ELECTROLYTIC FIXED CAPACITOR
5910-01-389-3761 A capacitor, whose capacitance value cannot be adjusted or varied, having a chemically formed film as the dielectric. It may be a single unit, or consist of two or more fixed units which cannot be separated.
Alternate Parts: 89085111, 89085-111, 81D222P063KB2, 5910-01-389-3761, 01-389-3761, 5910013893761, 013893761
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 59 | APR 22, 1994 | 01-389-3761 | 00008 ( CAPACITOR, FIXED, ELECTROLYTIC ) |
REFERENCE DRAWINGS & PICTURES
W/O MTG FACILITIES, TERMINAL(S) ON ONE END
NO COMMON OR GROUNDED ELECTRODE(S)
Cross Reference | NSN 5910-01-389-3761
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| 89085-111 | 037Z3 | DLA LAND AND MARITIMEDBA ENGINEERING AND TECHNICAL |
| 81D222P063KB2 | 7M138 | UNITED CHEMI-CON MFG INC |
Technical Data | NSN 5910-01-389-3761
| Characteristic | Specifications |
|---|---|
| CAPACITANCE VALUE PER SECTION | 2200.000 MICROFARADS SINGLE SECTION |
| TOLERANCE RANGE PER SECTION | -20.00 TO +20.00 PERCENT SINGLE SECTION |
| NONDERATED CONTINUOUS VOLTAGE RATING AND TYPE PER SECTION | 63.0 DC SINGLE SECTION |
| NONDERATED OPERATING TEMP | -40.0 DEG CELSIUS MINIMUM AND 105.0 DEG CELSIUS MAXIMUM |
| BODY STYLE | W/O MTG FACILITIES, TERMINAL(S) ON ONE END |
| BODY DIAMETER | 1.180 INCHES MINIMUM AND 1.219 INCHES MAXIMUM |
| BODY LENGTH | 1.101 INCHES MINIMUM AND 1.259 INCHES MAXIMUM |
| SCHEMATIC DIAGRAM DESIGNATOR | NO COMMON OR GROUNDED ELECTRODE(S) |
| TERMINAL TYPE AND QUANTITY | 2 PIN |
| TERMINAL LENGTH | 0.210 INCHES MINIMUM AND 0.290 INCHES MAXIMUM |
| CENTER TO CENTER DISTANCE BETWEEN TERMINALS PARALLEL TO DIAMETER | 0.390 INCHES MINIMUM AND 0.398 INCHES MAXIMUM |
| CASE MATERIAL | METAL |
| CASE INSULATION MATERIAL | PLASTIC |
| CAPACITIVE ELECTRODE MATERIAL | ALUMINUM |
| EQUIVALENT SERIES RESISTANCE AT REFERENCE TEMP IN OHMS | 99.00 |
| REFERENCE TEMP AT WHICH RATED | 25.0 DEG CELSIUS |
| ELECTRICAL POLARIZATION | POLARIZED |
| RELIABILITY INDICATOR | NOT ESTABLISHED |
| TEST DATA DOCUMENT | 14933-89085 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) AND 81349-MIL-C-39018 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
| TERMINAL SURFACE TREATMENT | SOLDER |