NSN 5910-01-435-2541
Part Details | PLASTIC DIELECTRIC FIXED CAPACITOR
5910-01-435-2541 A capacitor whose capacitance value cannot be adjusted or varied, having a plastic, plastic film, plasticized (plastic impregnated) paper, or any combination of plastic and paper or plastic and paper films as the dielectric material. The plastic may be one or more types of synthetic compounds such as polyesters, polyfluorides, polycabonates, and the like. It may be a single unit, or consist of two or more fixed units which cannot be separated. For items whose electrodes consist of a metallic film deposited (metallized) on the dielectric material, see CAPACITOR, FIXED, METALLIZED, PAPER-PLASTIC DIELECTRIC.
Alternate Parts: 386D1001 ITEM 20, MILC5551410, MIL-C-55514/10, CFR15AKF105JP, 5910-01-435-2541, 01-435-2541, 5910014352541, 014352541
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 59 | AUG 19, 1996 | 01-435-2541 | 00006 ( CAPACITOR, FIXED, PLASTIC DIELECTRIC ) |
REFERENCE DRAWINGS & PICTURES
W/O MTG FACILITIES, AXIAL TERMINALS
NO COMMON OR GROUNDED ELECTRODE(S)
Cross Reference | NSN 5910-01-435-2541
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| 386D1001 ITEM 20 | 51435 | EMS DEVELOPMENT CORPORATION |
| MIL-C-55514/10 | 81349 | MILITARY SPECIFICATIONSPROMULGATED BY MILITARY |
| CFR15AKF105JP | 81349 | MILITARY SPECIFICATIONSPROMULGATED BY MILITARY |
Technical Data | NSN 5910-01-435-2541
| Characteristic | Specifications |
|---|---|
| CAPACITANCE VALUE PER SECTION | 1.000 MICROFARADS SINGLE SECTION |
| TOLERANCE RANGE PER SECTION | -5.00 TO +5.00 PERCENT SINGLE SECTION |
| NONDERATED CONTINUOUS VOLTAGE RATING AND TYPE PER SECTION | 600.0 DC SINGLE SECTION |
| NONDERATED OPERATING TEMP | -55.0 DEG CELSIUS MINIMUM AND 105.0 DEG CELSIUS MAXIMUM |
| BODY STYLE | W/O MTG FACILITIES, AXIAL TERMINALS |
| BODY DIAMETER | 1.223 INCHES NOMINAL |
| BODY LENGTH | 2.438 INCHES NOMINAL |
| SCHEMATIC DIAGRAM DESIGNATOR | NO COMMON OR GROUNDED ELECTRODE(S) |
| TERMINAL TYPE AND QUANTITY | 2 UNINSULATED WIRE LEAD |
| TERMINAL LENGTH | 1.750 INCHES MINIMUM |
| TERMINAL DIAMETER | 0.032 INCHES NOMINAL |
| CASE MATERIAL | PLASTIC |
| DISSIPATION FACTOR AT REFERENCE TEMP IN PERCENT | 0.100 |
| RELIABILITY INDICATOR | ESTABLISHED |
| RELIABILITY FAILURE RATE LEVEL IN PERCENT | 0.100 |
| TEST DATA DOCUMENT | 81349-MIL-C-55514 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
| SPECIFICATION/STANDARD DATA | 81349-MIL-C-55514 TO 10 GOVERNMENT SPECIFICATION |
| TERMINAL SURFACE TREATMENT | SOLDER |
| DIELECTRIC MATERIAL | PLASTIC POLYPROPYLENE |