NSN 5930-00-450-1112
Part Details | THERMOSTATIC SWITCH
5930-00-450-1112 A switch that is actuated by changes in ambient temperature. Excludes CIRCUIT BREAKER; CONTROL, TEMPERATURE (as modified); FUSE (as modified); PROTECTOR, THERMAL-OVERLOAD, ELECTRICAL MOTOR; RELAY, THERMAL; and THERMOSTAT, FLOW CONTROL. See also CONTROL, TEMPERATURE (as modified) and REGULATOR, TEMPERATURE (as modified).
Alternate Parts: M1150130233, 101791793, 10179179-3, 5930-00-450-1112, 00-450-1112, 5930004501112, 004501112
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 59 | MAY 07, 1971 | 00-450-1112 | 00451 ( SWITCH, THERMOSTATIC ) |
REFERENCE DRAWINGS & PICTURES
CYLINDRICAL W/FLANGE
Cross Reference | NSN 5930-00-450-1112
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| M1150130233 | 82647 | SENSATA TECHNOLOGIES, INCDIV SENSATA ATTLEBORO |
| 10179179-3 | 18876 | U S ARMY AVIATION AND MISSILECOMMAND |
Technical Data | NSN 5930-00-450-1112
| Characteristic | Specifications |
|---|---|
| STYLE DESIGNATOR | 5 CYLINDRICAL W/FLANGE |
| OVERALL LENGTH | 1.217 INCHES NOMINAL |
| OVERALL HEIGHT | 0.653 INCHES MINIMUM AND 0.663 INCHES MAXIMUM |
| BODY DIAMETER | 0.687 INCHES MAXIMUM |
| BODY HEIGHT | 0.341 INCHES MINIMUM AND 0.351 INCHES MAXIMUM |
| NONPILE-UP CONTACT ARRANGEMENT | 1 POLE, SINGLE THROW, NORMALLY OPEN, MOMENTARY ACTION |
| CONTACT ACTION STIMULUS | INCREASE |
| CONTACT ADJUSTABILITY | DEACTUATION POINT NOT ADJUSTABLE AND ACTUATION POINT NOT ADJUSTABLE |
| CONTACT STIMULUS RATING | AF145.00 ACTUATION POINT MINIMUM AND AF155.00 ACTUATION POINT MAXIMUM AND AF125.00 DEACTUATION POINT MINIMUM AND AF135.00 DEACTUATION POINT MAXIMUM AND AF20.00 DIFFERENTIAL POINT NOMINAL |
| MEDIA FOR WHICH DESIGNED | GAS |
| TEMP SENSING ELEMENT TYPE | INTERNAL SENSOR |
| TERMINAL TYPE | TAB, SOLDER LUG |
| MOUNTING METHOD | BRACKET AND SLOT AND UNTHREADED HOLE |
| UNTHREADED MOUNTING HOLE DIAMETER | 0.133 INCHES MINIMUM AND 0.147 INCHES MAXIMUM |
| MOUNTING SLOT WIDTH | 0.133 INCHES MINIMUM AND 0.147 INCHES MAXIMUM |
| MOUNTING FACILITY PATTERN | TWO POSITION IN-LINE |
| DISTANCE BETWEEN MOUNTING FACILITY CENTERS | 0.930 INCHES MINIMUM AND 0.944 INCHES MAXIMUM |
| FEATURES PROVIDED | HERMETICALLY SEALED CASE |
| TEST DATA DOCUMENT | 81349-MIL-S-24236 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |