NSN 5940-01-475-6946
Part Details | TERMINAL BOARD
5940-01-475-6946 An item consisting of insulating material, which is specifically designed to have fastened thereon, or on which are fastened terminal(s), such as screws, solder lugs, solder studs, solderless connectors, clips, and the like. It is usually used for junctions or terminations of wire or cable assemblies. It does not include items as defined above with parts, such as resistors and capacitors mounted thereon. Do not use if a more specific name exists, such as FUSEHOLDER; HOLDER, RESISTOR; FANNING STRIP; CONTACT ASSEMBLY, ELECTRICAL; JACK ASSEMBLY, TIP; CHAMBER, CABLE TERMINAL; PANEL (2) (as modified); CONNECTOR (as modified). Excludes TERMINAL, STUD; TERMINAL, FEEDTHRU, INSULATED; POST, BINDING, ELECTRICAL; and CHASSIS, ELECTRICAL-ELECTRONIC EQUIPMENT. For items having printed electrical conductor paths, see PRINTED WIRING BOARD.
Alternate Parts: ST5M1379F102, ST5M1379, 1302, ST5M1379F102, 5940-01-475-6946, 01-475-6946, 5940014756946, 014756946
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 59 | JUN 09, 2000 | 01-475-6946 | 00404 ( TERMINAL BOARD ) |
REFERENCE DRAWINGS & PICTURES
STRIP TYPE
Cross Reference | NSN 5940-01-475-6946
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| ST5M1379F102 | 76301 | BOEING COMPANY, THEDBA BOEING |
| ST5M1379 | 76301 | BOEING COMPANY, THEDBA BOEING |
| 1302 | 19904 | STROCO MANUFACTURING, INC. |
| ST5M1379F102 | 59570 | TRICO MANUFACTURING INC. |
Technical Data | NSN 5940-01-475-6946
| Characteristic | Specifications |
|---|---|
| BODY STYLE | STRIP TYPE |
| BOARD CONSTRUCTION | SOLID CONSTRUCTION |
| MOUNTING FACILITY TYPE AND QUANTITY | 1 FLANGE |
| BOARD OVERALL LENGTH | 1.500 INCHES |
| BOARD OVERALL WIDTH | 0.810 INCHES |
| BOARD THICKNESS | 0.063 INCHES |
| TERMINAL PATTERN ARRANGEMENT | SINGLE ROW |
| CENTER TO CENTER DISTANCE BETWEEN TERMINALS | 0.750 INCHES |
| TERMINAL FACILITY QUANTITY | 2 |
| SPECIAL FEATURES | ITEM HAS NO PILOT HOLES, HOLES ARE DRILLED AND RIVETS USED AT TIME OF MOUNTING; TEMPERATURE: -65 DEGREES F TO +400 DEGREES F; EPOXY PRIMER NOT APPLIED IN AREA OF TERMINAL CONTACT, OR TO THE MOUNTING SIDE OF THE FLANGE |