NSN 5940-01-497-5779
Part Details | TERMINAL BOARD
5940-01-497-5779 An item consisting of insulating material, which is specifically designed to have fastened thereon, or on which are fastened terminal(s), such as screws, solder lugs, solder studs, solderless connectors, clips, and the like. It is usually used for junctions or terminations of wire or cable assemblies. It does not include items as defined above with parts, such as resistors and capacitors mounted thereon. Do not use if a more specific name exists, such as FUSEHOLDER; HOLDER, RESISTOR; FANNING STRIP; CONTACT ASSEMBLY, ELECTRICAL; JACK ASSEMBLY, TIP; CHAMBER, CABLE TERMINAL; PANEL (2) (as modified); CONNECTOR (as modified). Excludes TERMINAL, STUD; TERMINAL, FEEDTHRU, INSULATED; POST, BINDING, ELECTRICAL; and CHASSIS, ELECTRICAL-ELECTRONIC EQUIPMENT. For items having printed electrical conductor paths, see PRINTED WIRING BOARD.
Alternate Parts: GFTSX12, GFTSX-12, 5940-01-497-5779, 01-497-5779, 5940014975779, 014975779
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 59 | MAY 24, 2002 | 01-497-5779 | 00404 ( TERMINAL BOARD ) |
REFERENCE DRAWINGS & PICTURES
BARRIER TYPE
Cross Reference | NSN 5940-01-497-5779
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| GFTSX-12 | 73631 | POWERS HOLDINGS, INC.DBA CURTIS INDUSTRIES DIVISION |
Technical Data | NSN 5940-01-497-5779
| Characteristic | Specifications |
|---|---|
| BODY STYLE | BARRIER TYPE |
| BOARD CONSTRUCTION | SOLID CONSTRUCTION |
| MOUNTING FACILITY TYPE AND QUANTITY | 2 UNTHREADED HOLE |
| BOARD OVERALL LENGTH | 6.062 INCHES |
| BOARD OVERALL WIDTH | 0.718 INCHES |
| TERMINAL PATTERN ARRANGEMENT | SINGLE ROW |
| CENTER TO CENTER DISTANCE BETWEEN TERMINALS | 0.437 INCHES |
| CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO LENGTH | 5.687 INCHES |
| DISTANCE FROM BOTTOM EDGE OF TERMINAL BOARD TO CENTER OF MOUNTING HOLE | 0.359 INCHES |
| DISTANCE FROM LEFT EDGE OF TERMINAL BOARD TO CENTER OF FIRST MOUNTING FACILITY | 0.187 INCHES |
| MOUNTING HOLE DIAMETER | 0.190 INCHES |
| CURRENT RATING IN AMPS | 20.0 |
| SPECIAL FEATURES | TERMINALS MOLDED IN PLACE WITH PRECISION SCREW MACHINED BRASS INSERTS; FEED-THRU INSULATORS ARE INTEGRAL PART OF MOLDINGS; EXTERNAL TERMINALS WITH INTERNAL TERMINALS |
| END ITEM IDENTIFICATION | NSN 4520-01-439-1682; HEATER, DUCT TYPE 120 |
| PART NAME ASSIGNED BY CONTROLLING AGENCY | TERMINAL BLOCK |