NSN 5962-01-135-2100
Part Details | LINEAR MICROCIRCUIT
5962-01-135-2100 A microcircuit whose output is a function of the input; that is, the output varies in a predetermined and essentially predictable manner from the input signal.
Alternate Parts: AD590KH883B, AD590KH/883B, AD590JH883B, AD590JH/883B, AD590JH833B, AD590JH/833B, 1423390003, 14233900-03, 850120002, 850-120-002, SE00510310, SE00510-310, 5962-01-135-2100, 01-135-2100, 5962011352100, 011352100
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 59 | JUL 19, 1982 | 01-135-2100 | 31778 ( MICROCIRCUIT, LINEAR ) |
REFERENCE DRAWINGS & PICTURES
Cross Reference | NSN 5962-01-135-2100
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| AD590KH/883B | 24355 | ANALOG DEVICES, INC.DIV CORPORATE HEADQUARTERS |
| AD590JH/883B | 24355 | ANALOG DEVICES, INC.DIV CORPORATE HEADQUARTERS |
| AD590JH/833B | 24355 | ANALOG DEVICES, INC.DIV CORPORATE HEADQUARTERS |
| 14233900-03 | 27963 | GENERAL DYNAMICS INFORMATION SYSTEMSINC. |
| 850-120-002 | 26055 | PARKER-HANNIFIN CORPORATIONDBA ELECTRONICS SYSTEMS DIVISION |
| SE00510-310 | K0216 | THALES OPTRONICS LIMITED |
Technical Data | NSN 5962-01-135-2100
| Characteristic | Specifications |
|---|---|
| DESIGN FUNCTION AND QUANTITY | 1 TRANSDUCER, TEMPERATURE |
| INPUT CIRCUIT PATTERN | 1 INPUT |
| VOLTAGE RATING AND TYPE PER CHARACTERISTIC | ACV44.0 VOLTS MAXIMUM |
| OPERATING TEMP RANGE | -55.0 TO +150.0 DEG CELSIUS |
| TERMINAL TYPE AND QUANTITY | 3 PIN |
| TERMINAL SURFACE TREATMENT | SOLDER |
| INCLOSURE CONFIGURATION | CAN |
| INCLOSURE MATERIAL | METAL |
| CASE OUTLINE SOURCE AND DESIGNATOR | T0-52 JOINT ELECTRON DEVICE ENGINEERING COUNCIL |
| BODY OUTSIDE DIAMETER | 0.209 INCHES MINIMUM AND 0.230 INCHES MAXIMUM |
| BODY HEIGHT | 0.115 INCHES MINIMUM AND 0.150 INCHES MAXIMUM |
| STORAGE TEMP RANGE | -65.0 TO +175.0 DEG CELSIUS |
| FEATURES PROVIDED | HERMETICALLY SEALED AND MONOLITHIC AND HIGH IMPEDANCE AND TEMPERATURE COMPENSATED |
| TEST DATA DOCUMENT | 27963-14233900 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |
| END ITEM IDENTIFICATION | AMCS 82577 |